The Secret Society of Lathe Trolls

I think I finally found it…can you send me a email?not pm here so I can forward picture
Thanks

i might have one i will check when back home ...i definitely dont need it anymore

for all the hungry and thirsty souls we have a small little event tomorrow. a total coincidence that its near making vinyl. but has nothing to do with it. lets have a good time, play the new stereo cutterhead quartett and be part of: so happy to forward the official message here ********************...

dear ortofon , westrex and haeco stereo head owners for neumann heads, we (almost) know everything we need to know, but you can still send me the numbers, in case something got stolen and shows up at my place one day. (everybody i did not contact directly yet by mail) i plan a nice surprise for the ...

Yes so far no one picked it up.
Comes with pitch18.head amps depending on your budget.local pick up only

hello i wrote thomas directly in german. but i think just for all the followers some short hints. i just can repeat and repeat every few years. these soft spider coils will never work.... i posted that almost in the beginning of lathetrolls. and there are some links that covers some of the basic top...

in switzerland there are 3 pro cutting lathes. all of them can do full analog path. dialba head. ortofon amps. telefunken preview: [url]www.centraldubs.com[/url] sx74 head sal74 amps. studer a80 1/4 and 1/2 track. [url]www.vinylaudio.ch[/url] lacallas, dialba.sx74 (and whatever head you want in ster...

i can normally organize always something in the 8-12k range. sx68,sx74 completely refurbished.with test cut, freq charts and checkout report. internally new all springs. coils done. new torque tube, v-spring so they are all like brand new sx74's as only the frame and magnets stay same. its mostly th...

[quote]'m looking for an Ortofon CPS741 Correction Amplifier.
Even the TAM Studio CPS741 Correction Amplifier would be good.[/quote]

well its just a glued TAM tag on top of the ortofon one.

offers welcome. if ok i let it go

GO511 i have never seen . i have both the amps and the schematics. just no scanning assistance. one day the flokason book will be out with all in. but only GO541.( which was official amp for DS522 in most sales brochures datasheets. and how i received in combo with a DS681 many years ago. ) but i gu...

The Arduino Nano is really at its limit being able to play a 16 bit 44.1Khz mono wav maybe a teensy will be great. check it out https://www.pjrc.com/teensy/gui/index.html and if you want 16bit stereo use the breakoutboard. https://www.pjrc.com/store/teensy3_audio.html ok. maybe double ,tripple pric...

here is the old post from 2012. i still host the version from dieb13. austrian (turntable) artist. check that version out as well if oyu are into linux use https://www.lathetrolls.com/viewtopic.php?f=2&t=3010&p=17691&hilit=dieb13#p17691 just in case you want the direct post. here.. *************** h...

Ah sorry mixed it up a little with the other VMS80 thread. was not very clear But that’s totally easy to do to spread up. If you want defined pitch increase also easy. Just a little time to implement On a lacquer master for pressing or is a cut on PETG enough? as it is more about tracking then that ...

i dont think that i am in train trip distance to help where are you located? those VMS80 are technically all end of life. this is just the beginning... 40 years is already quite long operation time. for such a TTL graveyard. so expect a little more attention ,maintenance in future. send me a mail. f...

hello i see more and more damaged torque tubes when head comes in for repair. the main reason is the black anodized shanks of NSH-2 styli. with the engraved numbers. which is available since a few years. the original neuman torque tube is anodized. the idea is to have a hardened surface. the origina...

thats a damn bargain.
i sell them for 5k.
all was refurbished and checked. changed to VC200c version use for any lathe.new frontplate. currentmeters.
happy new owner.

Otherwise it would be better if you just shut up shop. exactly what i announced and will do. i am an almost one man show. in deep shit just to help out regular business for (mostly european) pro cutting rooms. so if you hear nothing that means we are in deep shit. i have a very limited output. one ...

the VAB84 was the first thing i threw out of the SP79 desk. i did mor than 10 years of DMM cutting. it was unacceptable. and another reason why dmm sounded so bad in the 80ies. but yes it had a neumann logo on it so it must be good. use a good phasefree mix. or use a fixed crossover. or if variable ...

Yes all are gone.all who sent me a mail will receive a mail in the next few days with confirmation and the head number . If you don’t receive that soon you are unfortunately not on the list There where only 20 something left and I keep 2-3 for fast repair service.if someone on the list will back off...

so far no one picked it up.
the lathe is still available...

pitch18 nice stereo head and amps are available too.

f.