Diamond Styli
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- tapesandtubes
- Posts: 55
- Joined: Tue Nov 17, 2015 11:12 am
- Location: Philadelphia, PA
- Contact:
Diamond Styli
Can anyone suggest a reliable supplier of a diamond cutting stylus for a Presto? Any suggestions would be helpful.
Presto K8 | 6N
Re: Diamond Styli
Been very happy with Myshank products...
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
- socialroots
- Posts: 161
- Joined: Tue Nov 11, 2014 2:33 pm
- Location: Dulan village,Taitung,Taiwan
Re: Diamond Styli
Ask nicely Mr. Chouet from Myshank. I buy my presto long shanks from him, great product, great service. Mr.Chouet is has very been helpful as well whenever I have some newbie questions and has always been prompt to answer my questions by email.
why fuck around?
Patrick
why fuck around?
Patrick
Re: Diamond Styli
http://www.lathetrolls.com/viewtopic.php?f=10&t=6955&p=45193#p45193
I'm their competitor as they said... So far that word is meaning enough for us.
I'm their competitor as they said... So far that word is meaning enough for us.
http://www.myshank.com
skype : steven.myshank
* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
skype : steven.myshank
* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
- socialroots
- Posts: 161
- Joined: Tue Nov 11, 2014 2:33 pm
- Location: Dulan village,Taitung,Taiwan
Re: Diamond Styli
Stateside thereis opcode66, Todd . That has his own supply of diamond styli.
Someone correct me if im wrong but the other seller of diamond stylis is a reseller of Myshank diamonds.
Respect,
Patrick
Someone correct me if im wrong but the other seller of diamond stylis is a reseller of Myshank diamonds.
Respect,
Patrick
- tapesandtubes
- Posts: 55
- Joined: Tue Nov 17, 2015 11:12 am
- Location: Philadelphia, PA
- Contact:
Re: Diamond Styli
Thanks everyone. Yes, MyShank will not sell me anything. I'll keep looking.
Presto K8 | 6N
Re: Diamond Styli
Here's todd's link to the presto diamond stylus.
http://deepgroovesmastering.com/store/presto_long_shank.aspx
http://deepgroovesmastering.com/store/presto_long_shank.aspx
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
Re: Diamond Styli
myshank (Steven's) diamonds are probably the best you can get.
- powerstrip
- Posts: 269
- Joined: Sun May 08, 2011 10:02 am
Re: Diamond Styli
why is that?tapesandtubes wrote:Thanks everyone. Yes, MyShank will not sell me anything. I'll keep looking.
Re: Diamond Styli
Read the messages...powerstrip wrote:why is that?tapesandtubes wrote:Thanks everyone. Yes, MyShank will not sell me anything. I'll keep looking.
http://www.myshank.com
skype : steven.myshank
* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
skype : steven.myshank
* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
- socialroots
- Posts: 161
- Joined: Tue Nov 11, 2014 2:33 pm
- Location: Dulan village,Taitung,Taiwan
Re: Diamond Styli
Seems like the original conflict was initiated by another thread about pvc blanks and the differences between Myshank blanks and its new competitors pvc blanks. Are there any trolls out there that have used the new pvc blanks from the Record blanks camp yet? Im curious to read a review about these , the good , the bad and especially compared to the Myshank pvc blanks. The comparisons review I read from the other thread was posted by the seller of the Record blanks pvc, so maybe its alittle partial, but maybe its true, so im hoping somebody out there can give a unbiased review of these blanks.
respect,
Patrick
respect,
Patrick
Re: Diamond Styli
I have a question about setting up the Diamond shank. I was looking at the pdf from Deep Grooves mastering on adjusting the angle of the shank to 15 to 20 degrees.
Does this apply to all diamond needles (myshank, deep groove)?
http://www.deepgroovesmastering.com/share/Plastic_Cutting_Guide.pdf
I sent a email to myshank and got no reply so i thought i should ask here.
Also what is the life of these diamonds compared to a sapphire?
Does this apply to all diamond needles (myshank, deep groove)?
http://www.deepgroovesmastering.com/share/Plastic_Cutting_Guide.pdf
I sent a email to myshank and got no reply so i thought i should ask here.
Also what is the life of these diamonds compared to a sapphire?
- powerstrip
- Posts: 269
- Joined: Sun May 08, 2011 10:02 am
Re: Diamond Styli
ok nothing in this tread indcicated, but now that id dig in i see the answer is 'drama'The Shank wrote:Read the messages...powerstrip wrote:why is that?tapesandtubes wrote:Thanks everyone. Yes, MyShank will not sell me anything. I'll keep looking.
I though it was due to international shipping problems.
carry on tussling...
- tapesandtubes
- Posts: 55
- Joined: Tue Nov 17, 2015 11:12 am
- Location: Philadelphia, PA
- Contact:
Re: Diamond Styli
Yes, unfortunately the answer is/was--drama. I guess this forum is called "trolls" for a reason.
Presto K8 | 6N