my setup
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
my setup
ive had a few ppl on the board msg me about my setup
so i made a very quick vid
enjoi
https://www.youtube.com/watch?v=l2PU3cPf2d0&t=17s
so i made a very quick vid
enjoi
https://www.youtube.com/watch?v=l2PU3cPf2d0&t=17s
Instagram @styluspressurerecords
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: my setup
Well done. I would have liked to see the overhead in more detail and heard the playback but still good.
- soeffingodly
- Posts: 273
- Joined: Fri Jan 19, 2018 8:48 am
- Location: Florida, USA
Re: my setup
Dope!
That stereo head looks pretty sweet. Thank you for sharing.
That stereo head looks pretty sweet. Thank you for sharing.
"I wasn't lying. Things I said later seemed untrue."
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: my setup
I have a mix up on soundcloud search nexus6ix the mix is called lathe cut dub mix check that for playback keep in mind I played it on numark pt 1 so on a regular deck the fidelity would be slightly higher.
Instagram @styluspressurerecords
- grooveguy
- Posts: 431
- Joined: Thu Jun 22, 2006 5:49 pm
- Location: Brea, California (a few miles from Disneyland)
- Contact:
Re: my setup
Quite commendable results, Fred. I don't have a Soundcloud account, and they wanted me to get one, but if you just go to soundcloud.com/nexus6ix, there it is! I don't see or hear vacuum in your YouTube video, so I assume you're embossing. Would be interested to know: is stylus homebrew or bought, and if so from whom; what material you're embossing on; and the vertical angle of your stylus to the record surface. For the relatively small diameter you're recording at, the sound is remarkably bright.
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: my setup
its one of jerrys tungsten from ebay i also use sapphire cones but not on that mix
my angle is pretty relaxed
i emboss on clear lexan and black makrolon, the mix was made on black makrolon
cheers
my angle is pretty relaxed
i emboss on clear lexan and black makrolon, the mix was made on black makrolon
cheers
Instagram @styluspressurerecords
- grooveguy
- Posts: 431
- Joined: Thu Jun 22, 2006 5:49 pm
- Location: Brea, California (a few miles from Disneyland)
- Contact:
Re: my setup
Well, it sounds quite respectable. Do you use a lubricant? A snapshot of the system in action would be helpful. Thanks!
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: my setup
I use turtle wax
It works the same as any other lathe
Computer to amp to lathe
All processing done in reaper
It works the same as any other lathe
Computer to amp to lathe
All processing done in reaper
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: my setup
i cut this today
its clear lexan embossed with tungsten
https://www.dropbox.com/s/3xlwo99po8sdmzf/mt%20airy%20demo%20not%20for%20resale.wav?dl=0
pretty much the ballpark of what my cuts sound like
its clear lexan embossed with tungsten
https://www.dropbox.com/s/3xlwo99po8sdmzf/mt%20airy%20demo%20not%20for%20resale.wav?dl=0
pretty much the ballpark of what my cuts sound like
Instagram @styluspressurerecords