Any lathe trolls in Berlin, Germany cutting DIY/lo-fi?
Dear trolls,
I'm looking to meet others locally (in real life) who have succeeded at cutting onto polycarbonate discs with a DIY or low cost setup which has a "good" sound quality.
Are there any of you in berlin, germany?
I'm looking to meet others locally (in real life) who have succeeded at cutting onto polycarbonate discs with a DIY or low cost setup which has a "good" sound quality.
Are there any of you in berlin, germany?
Re: Any lathe trolls in Berlin, Germany cutting DIY/lo-fi?
nobody?
Or anyone in germany at all?
Or anyone in germany at all?
Re: Any lathe trolls in Berlin, Germany cutting DIY/lo-fi?
Only Germany, or Europe too ?
- pellegrino707
- Posts: 46
- Joined: Mon Jan 06, 2014 11:45 am
- Location: Berlin
- Contact:
Re: Any lathe trolls in Berlin, Germany cutting DIY/lo-fi?
Hi Alain,
I am in Berlin, but i use a Vinyl Recorder, so not really a DIY set up...
I am in Berlin, but i use a Vinyl Recorder, so not really a DIY set up...
- Snug Music
- Posts: 299
- Joined: Sat Aug 15, 2015 5:23 pm
- Location: 28816 Stuhr / Moordeich LK Diepholz
Re: Any lathe trolls in Berlin, Germany cutting DIY/lo-fi?
hi Alain,.
me from Bremen- West Germany,
i came from Berlin and now in Bremen ( there is my family! )
we have made an lathe and i buys a defective old neumann there must be repaired,
but this came in Summer 2016.
cheers Scotty
me from Bremen- West Germany,
i came from Berlin and now in Bremen ( there is my family! )
we have made an lathe and i buys a defective old neumann there must be repaired,
but this came in Summer 2016.
cheers Scotty
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Re: Any lathe trolls in Berlin, Germany cutting DIY/lo-fi?
Hi i'm new to the forum.
I live in Halle (Saale) near Leipzig.
Sometimes i drive up to berlin or cottbus.
I build my own record lathe in january 2016.
I used an old DUAL 604 direct driven turntable.
The other components are self-made!
Here are some pic's:
I tried to cut some stuff with the use of a diamand-stylus -
but i got "better" sound and groove by embossing on CD's with a needle.
Here is a video of the best recording i did so far: Hopefully i will have more time in the future, to experiment more, to get better results.
I live in Halle (Saale) near Leipzig.
Sometimes i drive up to berlin or cottbus.
I build my own record lathe in january 2016.
I used an old DUAL 604 direct driven turntable.
The other components are self-made!
Here are some pic's:
I tried to cut some stuff with the use of a diamand-stylus -
but i got "better" sound and groove by embossing on CD's with a needle.
Here is a video of the best recording i did so far: Hopefully i will have more time in the future, to experiment more, to get better results.
You do not have the required permissions to view the files attached to this post.