Possible alternative to vacuum platter?
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Possible alternative to vacuum platter?
A friend just sent me this link, people who don't use vacuum platters may be interested...
https://www.kickstarter.com/projects/139447563/technics-1200-series-outer-record-periphery-clamp/description
Cheers
https://www.kickstarter.com/projects/139447563/technics-1200-series-outer-record-periphery-clamp/description
Cheers
Re: Possible alternative to vacuum platter?
ah neat! this would be cool to have for slightly warped 12" blanks.
not sure if it would work on my technics sp10 though?
not sure if it would work on my technics sp10 though?
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
Re: Possible alternative to vacuum platter?
I dont see a price posted for it maybe my eyesight has finally failed me.
I did a simple 16 inch aluminum chuck.
Only does 14 inch lacquers and 12 inch dubs.
Comes in pretty costly about 800€ before tax. The bottom parts really eats into the budget.
I have a chap who cuts front panels for me but cant cutting anything over 10mm depth which is a shame as would have brought the price down to 600€
The suction power wont be the same for 10/7 inch plates as there some exposed holes around the edge.
Its still mostly a work in progress but gives an idea
I did a simple 16 inch aluminum chuck.
Only does 14 inch lacquers and 12 inch dubs.
Comes in pretty costly about 800€ before tax. The bottom parts really eats into the budget.
I have a chap who cuts front panels for me but cant cutting anything over 10mm depth which is a shame as would have brought the price down to 600€
The suction power wont be the same for 10/7 inch plates as there some exposed holes around the edge.
Its still mostly a work in progress but gives an idea
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
Re: Possible alternative to vacuum platter?
Hi Peter, that looks great.
I've got a design in my head that I need to try too...
Cheers.
I've got a design in my head that I need to try too...
Cheers.
Re: Possible alternative to vacuum platter?
I can't wait until I can machine metal.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
Re: Possible alternative to vacuum platter?
Todd, hurry up man...
From time to time I have considered picking one up but the add on parts I would need is where the supplier really gets you.
From time to time I have considered picking one up but the add on parts I would need is where the supplier really gets you.
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.