Blanks of Unusual Thickness (BOUT)
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Blanks of Unusual Thickness (BOUT)
It’s the recycled postcard gal again. I’m giving up on my recordio restoration as I simply can’t get any working grooves despite replacing every tube, crystal and cap, so I guess it’s time to look to the future.
I have a general question. Would a 1/8” thick record be usable with Presto or similar lathes? Can adjustments be made to fit a thicker blank?
Kat
I have a general question. Would a 1/8” thick record be usable with Presto or similar lathes? Can adjustments be made to fit a thicker blank?
Kat
You do not have the required permissions to view the files attached to this post.
Re: Blanks of Unusual Thickness (BOUT)
Yes, 1/8" is no problem, as long as you adjust the right side of the overhead so that the overhead is level across the face of the disc. You can also just take off the platter mat, which should get you close.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Blanks of Unusual Thickness (BOUT)
hi
I had a similar job where I was too scared to adjust (long time ago) the setup up so I cut 2 records A/B then glued them together with thick polystyrene in the middle then cut the edges off and bored out the hole and another job I did it with cardboard in between, that thick cardboard with that hard inner lining ..lots of fun..
I had a similar job where I was too scared to adjust (long time ago) the setup up so I cut 2 records A/B then glued them together with thick polystyrene in the middle then cut the edges off and bored out the hole and another job I did it with cardboard in between, that thick cardboard with that hard inner lining ..lots of fun..
Re: Blanks of Unusual Thickness (BOUT)
yep same! the first time I ever bought my own plastic (back in 2012, woof) I bought 3/16" by accident. it worked fine!
and was hilarious when people bought my 3x thick records for my punk band
and was hilarious when people bought my 3x thick records for my punk band
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
Re: Blanks of Unusual Thickness (BOUT)
Interesting!!
3/16, huh? that’s thicker than an edison! Do you happen to have a picture?