For sale:: Presto 8N
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
For sale:: Presto 8N
I have for sale my presto 8N it has
Variable groove pitch overhead with damper. Heavly Modified using a 6N overhead with brass pullys And all the paperwork for the mod is with it.
Turntable needs a new motor and idler wheels
Presto diameter Eq for overhead
Presto diameter Eq electronics with paperwork including schematics
Grampian Type D Cutterhead Recently rebuilt with heater Connector Plate which looks original
Microscope
20ish 12inch Apollo Masters Blank
40ish 16inch Master Blank
And its looking for a Good Home...LOL
PM me if anyone is intrested....
Variable groove pitch overhead with damper. Heavly Modified using a 6N overhead with brass pullys And all the paperwork for the mod is with it.
Turntable needs a new motor and idler wheels
Presto diameter Eq for overhead
Presto diameter Eq electronics with paperwork including schematics
Grampian Type D Cutterhead Recently rebuilt with heater Connector Plate which looks original
Microscope
20ish 12inch Apollo Masters Blank
40ish 16inch Master Blank
And its looking for a Good Home...LOL
PM me if anyone is intrested....
!Work or Bang Time!
- petermontg
- Posts: 611
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
- dietrich10
- Posts: 844
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact:
- petermontg
- Posts: 611
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
blanks
hi amp doc
how much are you letting the 12" masters go for
and how much for the 14" masters
regards
peter
how much are you letting the 12" masters go for
and how much for the 14" masters
regards
peter
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
- Angus McCarthy
- Posts: 760
- Joined: Mon Aug 23, 2010 6:22 pm
- Location: Bloomsburg, PA, USA
Pics and Paperwork of the 8N
Excuse the DUST!!!LOL Thanks Angus!!
http://s1133.photobucket.com/albums/m599/Ampdoc/
And this is the guy who made the mod to the overhead and who I got the lathe from I found it with a google serch one day...
http://www.smecc.org/a_broadcast_engineer_in_korea_-_1957.htm
I would like to sell complete with everything and not split it up..
http://s1133.photobucket.com/albums/m599/Ampdoc/
And this is the guy who made the mod to the overhead and who I got the lathe from I found it with a google serch one day...
http://www.smecc.org/a_broadcast_engineer_in_korea_-_1957.htm
I would like to sell complete with everything and not split it up..
!Work or Bang Time!