The Magnetovolt "Curreg": Stylus Heater Supply

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
jesusfwrl
Posts: 365
Joined: Thu May 16, 2013 2:24 pm
Location: Earth
Contact:

The Magnetovolt "Curreg": Stylus Heater Supply

Post: # 46208Unread post jesusfwrl
Fri Feb 24, 2017 1:26 pm

Image

Image

Image


The Magnetovolt Curreg is a current regulated DC power supply unit, specifically designed for heating the stylus filament on disk mastering systems.

It can deliver up to 2A at 15VDC, capable of heating all commercially available styli as well as custom-wound heater coils. It can also be wired for a limit of 1A or 1.5A for finer resolution.

It is built with high quality heavy duty components for continuous reliable operation, and comes with several built-in safety features.
The outputs are fused to protect the load against accidental excessive current settings, there are voltage and current meters, as well as an easy facility for emergency shut down.
The current setting knob is part of a control circuit which does not pass the load current, from added longevity and reliability. Outputs are offered on both the front and rear panels.

It is handcrafted, soldered and screen-printed on demand.

Please visit http://www.magnetovolt.com for further details.


Image

Image

Image

Image

Image

Image
~~~ Precision Mechanical Engineering, Analog Disk Mastering ~~~
Agnew Analog Reference Instruments: http://www.agnewanalog.com

Post Reply