- gDavis_wax
- Posts: 14
- Joined: Tue Sep 26, 2017 2:37 am
Gates CB500 16" Turntable & RCA Cutting Attachment +
REPOSTED WITH PRICE CHANGE and OFFERS ACCEPTED!!!
Hey Lathe Gurus
I am selling one of my Lathe setups. Please let me know if anyone is interested. I spent quite a bit of time putting this together. Everything has been cleaned and in great function order. The Head for the RCA Cutting Attachment was refurbished by Gib at West-Tech with only a few hours of use. A Custom Wood Desk was made for it. Shelves and Door. Each Corner has a Bolt Mechanism for leveling Turntable. 2 High Precision Ortofon Levels are Built into the to top for fine tuning.
Below is the entire setup.
- Gates CB500 16" Transcription Turntable / Brand New Heavy Duty Power Plug added / RCA Cables replaced
- Gates has Playback Tonearm w/ New Audio-Technica Cart/Stylus
- RCA Type 72-D Recording Attachment. Cuts 33/3 or 78 IN/OUT. The Cutting Head was Completely Refurbished by Gib at WEST-TECH
- Custom built Wood Desk with Doors for Material Storage and built in Level adjustments
Comes with a Mix of 5 Cutting and Embossing Styli/Shanks.
Copy of the RCA Type 72-D Manual
(2) 12" Blank Optix Disks
Prefer Local Pickup (Houston, USA), but can be Crated and Shipped...please don't be afraid to ask for Shipping estimate. Usually $250-300 in Continental US and more for the rest of the world. Probably need to add about $100 to that if I need to properly take everything apart and pack properly.
Asking $3600 for everything. BEST OFFERS ACCEPTED!!!
Thanks!
Hey Lathe Gurus
I am selling one of my Lathe setups. Please let me know if anyone is interested. I spent quite a bit of time putting this together. Everything has been cleaned and in great function order. The Head for the RCA Cutting Attachment was refurbished by Gib at West-Tech with only a few hours of use. A Custom Wood Desk was made for it. Shelves and Door. Each Corner has a Bolt Mechanism for leveling Turntable. 2 High Precision Ortofon Levels are Built into the to top for fine tuning.
Below is the entire setup.
- Gates CB500 16" Transcription Turntable / Brand New Heavy Duty Power Plug added / RCA Cables replaced
- Gates has Playback Tonearm w/ New Audio-Technica Cart/Stylus
- RCA Type 72-D Recording Attachment. Cuts 33/3 or 78 IN/OUT. The Cutting Head was Completely Refurbished by Gib at WEST-TECH
- Custom built Wood Desk with Doors for Material Storage and built in Level adjustments
Comes with a Mix of 5 Cutting and Embossing Styli/Shanks.
Copy of the RCA Type 72-D Manual
(2) 12" Blank Optix Disks
Prefer Local Pickup (Houston, USA), but can be Crated and Shipped...please don't be afraid to ask for Shipping estimate. Usually $250-300 in Continental US and more for the rest of the world. Probably need to add about $100 to that if I need to properly take everything apart and pack properly.
Asking $3600 for everything. BEST OFFERS ACCEPTED!!!
Thanks!
- gDavis_wax
- Posts: 14
- Joined: Tue Sep 26, 2017 2:37 am
Re: Gates CB500 16" Turntable & RCA Cutting Attachment +
!!! PICTURES !!!
You do not have the required permissions to view the files attached to this post.
Re: Gates CB500 16" Turntable & RCA Cutting Attachment +
It only cuts inside out? What pitch of feedscrew?
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Gates CB500 16" Turntable & RCA Cutting Attachment +
Pretty sure those overheads cut either direction without changing the feedscrew. See below.piaptk wrote:It only cuts inside out? What pitch of feedscrew?
Last edited by rsimms3 on Sun Sep 02, 2018 8:48 pm, edited 1 time in total.
- gDavis_wax
- Posts: 14
- Joined: Tue Sep 26, 2017 2:37 am
Re: Gates CB500 16" Turntable & RCA Cutting Attachment +
That is Correct!
You can go Inside or Outside.
You can go Inside or Outside.