Wanted materials to manufacture vinyl record

[Micka35]

hello,

I am looking for the manufacture of vinyl record:

Two mold 12 "
one extruder
one stamper preformer
one vinyl edge trimmer
on punch label

If you have one of these machines made ​​me an offer please.

Thank, have a nice day

[Aussie0zborn]

What type of moulds do you need? Which press are they for?

[Micka35]

No matter of the molds, I make my own press. Made me an offer.

[Aussie0zborn]

You can buy moulds from www.recordproducts.com in the USA. They make two-piece and book type moulds so whatever the type
of press you make, they have something to suit.

There are also two makers of two-piece moulds in Europe. Maybe someone has their details.

Is your press going to be automatic or manual?

[klikli_ska]

There are also two makers of two-piece moulds in Europe. Maybe someone has their details.

It could be so great if someone share this details!!

[montalbano]

Well Mike,
probably one of the two you were mentioning it's us: we make our own moulds, pins and bushes.
Toolex pins and bushes are available to anyone, just write me a PM if interested. The quality and duration are excellent, the bushes are not collapsing at all, and the pins are quite lasting as well. After having grinded them (we have an old Colchester metal lathe - ex CGD Italy) we take them to harden and we then we finish them. We can make pins and bushes for Alpha Toolex, TCS, Lened. The steel is always the same, only the shapes and lengths are changing. (Leneds have a loooooong pin!)
As for moulds, it takes a lot of time to manufacture them. We used two pieces moulds for years and we manufactured a couple sets recently, but (Andi knows that) even if steady and affordable, they are a bit slow. And I don't feel like offering them at the moment.
But pins & bushes = no problem.
Cheers

[Aussie0zborn]

Hi Phil. No I didn't know it was you but now we know there is another supplier. Should be helpful to those that need your services.