Looking for: Record hole punch 7” big hole
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Looking for: Record hole punch 7” big hole
Hi,
Looking for a quality second hand big hole record puncher 7”
Kind regards,
Looking for a quality second hand big hole record puncher 7”
Kind regards,
Re: Looking for: Record hole punch 7” big hole
Preferable semi automatic, but by hand is also okay
-
- Posts: 1838
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: Looking for: Record hole punch 7” big hole
Might be easier to go to your local engineering shop and ask them to make a tool and die. You punch the records one by one with a hammer or better still, you can put the tool and die in a press and do them one by one.
Why an auto unit - are you putting this on a press? I have a Toolex automatic unit that I could be be convinced to sell.
Why an auto unit - are you putting this on a press? I have a Toolex automatic unit that I could be be convinced to sell.
Re: Looking for: Record hole punch 7” big hole
Found anything yet? Looking for one too.
Re: Looking for: Record hole punch 7” big hole
Yes, I’m interested too
Re: Looking for: Record hole punch 7” big hole
Where are you based? We make an electric flywheel press that will fit dies for a standard large hole or UK style dinked center but shipping will cost more than the machine. If you are in the US why not ask RPA, they have tabletop manual and electric models.
Re: Looking for: Record hole punch 7” big hole
Europe here actually, shipping costs from USA ARE expensive...
Re: Looking for: Record hole punch 7” big hole
newbuilt germany has built a 7inch dinker, mostly like the dinker
at the toolex 702 automatic press.
I saw a video of it, works fine. ask erwin
https://newbilt-machinery.com/machines-equipment/
at the toolex 702 automatic press.
I saw a video of it, works fine. ask erwin
https://newbilt-machinery.com/machines-equipment/