Video: GZ Digital Media, Lodenice, (14km from Prague) Czech

A spot for keeping track of especially cool (informative, fun) videos, photos, scans and other links about record cutting. (You can post them in other sections. Eventually they may end up here.) NOTE: Please put *Circuits, Schematics and Manuals* in the section with that name.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
mossboss
Posts: 2092
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

Video: GZ Digital Media, Lodenice, (14km from Prague) Czech

Post: # 7830Unread post mossboss
Sat Feb 13, 2010 4:47 am

Interesting A little short but! http://www.youtube.com/watch?v=GLIMkSejVKA
Cheers
Chris

Aussie0zborn
Posts: 1838
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:

Post: # 7833Unread post Aussie0zborn
Sat Feb 13, 2010 5:04 am

Well, here's a longer one.

Part 1 : DMM explained (9:35) Everything you wanted to know about DMM but were afraid to ask!
http://www.youtube.com/watch?v=8k4hfYtpdOU&feature=PlayList&p=135DC45F8DA60239&index=0

Part 2 : Pressing
http://www.youtube.com/watch?v=fC2laeFxvYw&NR=1
Last edited by Aussie0zborn on Sun Feb 14, 2010 6:21 am, edited 1 time in total.

User avatar
lubomikl
Posts: 8
Joined: Fri May 29, 2009 5:44 am
Location: slovakia

Re: Video: GZ Digital Media, Prague, Czech Republic

Post: # 7834Unread post lubomikl
Sat Feb 13, 2010 5:55 am

[quote = "mossboss"] Zaujímavé, ale trochu krátky! http://www.youtube.com/watch?v=GLIMkSejVKA
Cheers [/ quote]
hello guys
There is registered guy with nico GeorgeZ , he works as an engineer in his GZ Lodeniciach.

User avatar
mossboss
Posts: 2092
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

The long and Short of GZ

Post: # 7836Unread post mossboss
Sat Feb 13, 2010 6:22 am

Thanks for the input guys
And yes lubomikl, we know GeorgeZ and his DMM
What a lovely machine that is!
You would never go home would you?
Cheers
Chris

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

Re: The long and Short of GZ

Post: # 7876Unread post GeorgeZ
Mon Feb 15, 2010 3:47 pm

mossboss wrote:Thanks for the input guys
And yes lubomikl, we know GeorgeZ and his DMM
What a lovely machine that is!
You would never go home would you?
Cheers
Yes, I am a regular visitor of this forum :-)

Chris, please rename the topic to "Video: GZ Digital Media, Lodenice, Czech Republic" because Lodenice is a small town approx. 14 km far from Prague :!: I know, everybody knows only Prague from the Czech Republic, but it will be more accurate then.

More links compiled from different sources:

A video with auto-translated article:
http://translate.google.cz/translate?hl=cs&sl=cs&tl=en&u=http%3A%2F%2Fekonomika.idnes.cz%2Fvideo-jak-se-vyrabi-vinylova-deska-d5j-%2Fekoakcie.asp%3Fc%3DA090324_155746_ekoakcie_pin

A Photo Essay of a Record Pressing Plant:
http://www.razorcake.org/site/modules.php?name=News&file=article&sid=13738

GZ Factory Tour 2007 (pictures only):
http://s203.photobucket.com/albums/aa219/NWNPROD/GZ%20factory%20tour%20Oct%202007/

A visit of GZ Lodìnice - Czech article at Techno.cz: 06.11.2003 (+some pictures)
http://www.techno.cz/clanek/5316/gramofonove-zavody-lodenice-vyprava-techno.cz
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

User avatar
mossboss
Posts: 2092
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

GZ

Post: # 7878Unread post mossboss
Mon Feb 15, 2010 4:44 pm

Hey George
Thanks for the links Great
Can we abreviate you? like GeorgeZ=Gz or GZ or Dmm Gz?
There you are Choices
Cheers
Chris

andybee
Posts: 707
Joined: Mon Aug 14, 2006 2:12 pm
Location: Germany

Post: # 8024Unread post andybee
Fri Feb 26, 2010 10:39 am

WOW! those 4 DOUBLE MANUAL PRESSES look amazing!

:shock:

thanks for the links, yes :)

User avatar
blacknwhite
Posts: 483
Joined: Thu Apr 24, 2008 2:57 am
Location: US

Post: # 8026Unread post blacknwhite
Fri Feb 26, 2010 11:20 pm

Thanks for posting pics!

What is this operation? Trimming perhaps?

Image

WOW, MOST IMPRESSIVE... you guys MAKE your OWN RECORD MATERIAL? A real ALL-in-house operation just like RCA Victor in the 1940's!

Image

Dang... I need to sell some stuff to make more money to setup my metalworking workshop...

- Bob

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

Re: GZ

Post: # 8416Unread post GeorgeZ
Thu Apr 01, 2010 7:44 am

mossboss wrote:Hey George
Thanks for the links Great
Can we abreviate you? like GeorgeZ=Gz or GZ or Dmm Gz?
There you are Choices
Cheers
Hello,

please rather don't abbreviate me :roll:
My first name "Jiri" is George in English, and then the first letter from my surname was added. I thought the nickname could be unique as it is not very much used in English. It is only a coincidence with that "GZ" pressing plant abbreviation. I am not an official spokesman of GZ and even cannot be considered as any representative of the plant.

Follows some info about our new mastering system
http://www.gzvinyl.com/vinyl-27/news-31/new-vinyl-mastering-619

I wrote it for guys at GearSlutz forum:

--------------
Question:
Is the feedback path connected to the computer? Can you reveal who built the system and/or write/link to more info? Curious.. :)

--------------
Reply:
We use PrismSound Orfeus 192kHz/24-bit converters mounted to our Neumann cutting consoles with some additional hardware IO modules for direct control and measurement of all possible parameters from both our VMS-82 DMM cutting systems and of course the feedback recording through Orfeus.

Both workstations are equipped with high-end PC (quad core, 12GB RAM, Windows 7 64bit etc...) and dedicated software "Visual Vinyl Mastering" written by our developers. It can premaster and master most common source audio formats, process it (levels, EQ, compressors, limiters, monoing etc.), analyze and simulate the cutting with possibility to see the simulated grooves, calculated geometric parameters of the grooves, many graphic meters, histograms and other similar high-math stuff). Storage server support and database connection is also present.

We can directly compare recorded audio from feedback, plate or test pressing record and synchronize it with the source audio to hear any differences and also to see them after analyses. It is the best for resolving of bad cut or pressing claims, because we know immediately if it was our fault or not.

Except the Neumann cutting consoles, the VMS lathes and the Orfeus converters is all other equipment and software developed and built here. The team counts 6 guys and the development for sure took more than 3 years I am here.

Now all guys here need to learn new things and be able to use the system up to its full potentialities.

------------------
Question:
Since any differences would be due to playback and not cutting what do you use to model the playback? A specific make of cartridge or an idealized model. What happens when someone uses something different and is unhappy with the results?

-------------------
Reply:

We can simulate and analyze in both horizontal and vertical direction:

1) an immediate angle of the groove - so we can prevent breaking of the groove by the back part of the cutting stylus

2) an immediate radius of the groove - simply said if the playback tip can fit into the groove or not. The effective contact radius of spherical and elliptical tips we suppose as 12 and 5 microns respectively and we can see when, where and how much the limits for both kinds of tips are exceeded.

Well, the simulation only helps us to set up optimal parameters (compromise between space consumption x loudness x distortion), but of course we are not able to do miracles :-( with already badly recorded, mixed or mastered files/CDs.

We can do very loud cut if the customer wants it, but the distortion increases rapidly, esp. at high freq. range. Most of the time we have to tolerate some short parts out of the safe limits to be competitive with loudness and human ear cannot hear very short distortions.

Some claims are accepted (our faults) and we cut again for free, some rejected (bad master) and then the customer has to pay for another cut with different settings according to his wish (loud cut, bass boost etc.).

As I wrote on electrical.com forum (topic - mastering: engineer vs. pressing plant) we are in-house mastering/cutting facility, we need to have a source audio which is already premastered for vinyl. We will not miraculously improve the sound and we don't want to compete with profi-mastering studios.
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

User avatar
mossboss
Posts: 2092
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

Post: # 8417Unread post mossboss
Thu Apr 01, 2010 7:58 am

andybee wrote:WOW! those 4 DOUBLE MANUAL PRESSES look amazing!

:shock:

thanks for the links, yes :)
Hey Andy b
So what is amazing about them my friend? Quite common in the past Very popular and useful for reasonable sized runs Now days of course low labour cost places or very short runs
Hey Bob
This is just a blending extruder with a cooling chipping in front of it
PVC polymer is bought in and blended extruded so as to be fed into the presses No big deal really now days Very much unlike the Victor RCA video you are referring to This was a major effort as it was Raw materials input blended calendered compounded so as to get usable material
A rather laborious expensive set up unlike today's twin screw blending extruder and a chipping cooling system as depicted at GZ
They are smart as they can add things that are no longer done by the PVC manufacturers
It is OK when you are doing 5 odd million records a Year that is a lot of Vinyl but for small operators it becomes questionable
Cheers

Cheers
Chris

andybee
Posts: 707
Joined: Mon Aug 14, 2006 2:12 pm
Location: Germany

Post: # 8426Unread post andybee
Fri Apr 02, 2010 9:21 am

yes, nice factory, good, if you have your own printing
department.... makes good money!
I don´t understand the sadie/neumann connection, I think, this
is a bit of a overkill of software.
If you use the new display for the vinylium pitch, you might
have the same (or the most important) features for your lathe...
the manual presses need much personal power, only possible
in countrys with cheap personal costs.
in germany: too expensive.
If you use automatic presses, one operator can handle 3-4 presses,
if he is fast, even more, if you have packing robots...
what I not understand: do GZ produce their own PVC? or just
for color vinyl?
as far, I know, they produce copper blanks, very nice!
All the best for the future, GZ!
:)

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

Post: # 8430Unread post GeorgeZ
Fri Apr 02, 2010 11:46 am

andybee wrote:...
I don´t understand the sadie/neumann connection, I think, this
is a bit of a overkill of software.
If you use the new display for the vinylium pitch, you might
have the same (or the most important) features for your lathe...
When our "cutters" need to cut 40 plates per day, other guys need to analyze the audio for next titles, prepare all the settings and run the simulation. It is necessary for well cut plates to split the work among several guys. Moreover it can be considered as a doublecheck. All the cutting parameters are stored in database so we can make a perfect copy of the plate. We also plan to use the software for our quality control department so they can compare and analyze the pressed records with source data files. A lot of work has been done since 2006 but much more is waiting in the near future...
andybee wrote: the manual presses need much personal power, only possible
in countrys with cheap personal costs.
in germany: too expensive.
If you use automatic presses, one operator can handle 3-4 presses,
if he is fast, even more, if you have packing robots...
Yes, but with manual presses we can do more "special" colored records - haze, splatter, more colors etc. Also we can maintain all the presses here in the CR...
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

andybee
Posts: 707
Joined: Mon Aug 14, 2006 2:12 pm
Location: Germany

Post: # 8443Unread post andybee
Sat Apr 03, 2010 3:48 pm

o.k. 40 plates per day is a lot :)

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

New video

Post: # 13954Unread post GeorgeZ
Thu Mar 31, 2011 4:42 pm

New video:
http://www.youtube.com/watch?v=e-aHVKHzONQ
with DMM cutting, plating, pressing, also many records presented
+ an interview with our manager of vinyl customer service department (again only in Czech :? sorry)
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

New article + latest photos

Post: # 20932Unread post GeorgeZ
Wed Sep 05, 2012 7:32 am

A new article with latest photos and video from GZ Vinyl (in Czech language):
http://technet.idnes.cz/lisovani-desky-blazinec-0wz-/tec_audio.aspx?c=A120830_171953_tec_audio_nyv

Unfortunatelly, Google Translate isn't very successful translating this article into English :roll:
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

New video from GZ by TV PrimaCool

Post: # 22237Unread post GeorgeZ
Thu Dec 20, 2012 8:07 am

I hope that the following videos from November 2012 will play from any IP address.

DMM cutting with our new system + all the other processing parts in GZ
Tezka drina III (17) | PrimaPLAY... http://play.iprima.cz/all/301690

A separate video showing the cutting stylus simulator only:
Tezka drina III (17) - Zapis na vinyly | PrimaPLAY... http://play.iprima.cz/all/301758

There are some small inaccuracies, but this Czech TV program is more about fun, it is not an educational document...
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

Re: Video: GZ Digital Media, Lodenice, (14km from Prague) Cz

Post: # 30271Unread post GeorgeZ
Fri May 30, 2014 10:41 am

Just a small advertisment for our new web-page http://www.gzvinyl.com :)
The web has not been polished yet - not all pictures are final versions, a lot of Glossary is missing etc... but we will complete and polish the web in next few weeks.
Any comments, criticism, praise, suggestions are welcomed (publicly or through private messages).
I was responsible for the Manufacturing part of the web and most production FAQs - under "Support".
Esp. for Serif: please note the correct word for "electroforming" :wink:
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

Re: Video: GZ Digital Media, Lodenice, (14km from Prague) Cz

Post: # 48302Unread post GeorgeZ
Thu Nov 02, 2017 5:16 am

Latest BBC article with a shorter version of the video clip aired yesterday: http://www.bbc.com/news/business-41747615
Mr. Sterba is speaking in front of one of the new QC workstations (not presented officially to the public yet, nor on the web).

+ some other videos from 2016/2017

You can see our DMM lathes with new cameras & LCD + new Blue CZ manual presses + cleaner galvanic hall here:
https://www.youtube.com/watch?v=efcfhSMCd54
and here:
https://www.youtube.com/watch?v=BhKIwOtnqHM

or with a short view on our new still unpublished quality control system around 0:26 and new Blue CZ automat presses around 0:10 here:
https://www.youtube.com/watch?v=CbIJKUIzQSo
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

Re: Video: GZ Digital Media, Lodenice, (14km from Prague) Cz

Post: # 50949Unread post GeorgeZ
Fri Aug 03, 2018 6:46 am

New 2018 video from GZ: https://youtu.be/XNrg2bTlNGI?t=46
Again in our beautiful Czech language :-)
New QC system from 7:23.
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

User avatar
GeorgeZ
Posts: 103
Joined: Mon Jun 22, 2009 10:18 am
Location: near Prague
Contact:

Re: Video: GZ Digital Media, Lodenice, (14km from Prague) Cz

Post: # 54250Unread post GeorgeZ
Thu Oct 10, 2019 2:54 am

A new looong video about GZ made by M. Fremer from Analog Planet:
https://www.youtube.com/watch?v=MFNhp53xS_U
Jiri Zita
Premastering manager
GZ Vinyl / GZ Media Lodenice
Czech Republic

Post Reply