Who can help me with my VR T560 cutterhead?

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 40349Unread post sakuszi
Sun Feb 07, 2016 1:15 am

my record control panel , half automatic :)
You do not have the required permissions to view the files attached to this post.

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40365Unread post Snug Music
Sun Feb 07, 2016 8:28 am

Hey saku,..
Can't play this video... :(

Error 404!

Regards Scotty
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40373Unread post Snug Music
Sun Feb 07, 2016 10:26 am

sakuszi wrote:my record control panel , half automatic :)

hey Sakuszi,..

great tunes,..very, very awesome!!!
like your controlpanel...;)

regards Scotty 8) :wink:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40376Unread post Snug Music
Sun Feb 07, 2016 11:33 am

hey,..

here a little images ( Pic ) how to setup an Dyn. Cuttinghead with Tit.Dome Tweeter ( Red-Car-Parts )

regard Scotty 8) :wink:
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
aaron
Posts: 203
Joined: Sun Sep 04, 2005 4:51 pm
Location: USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 40377Unread post aaron
Sun Feb 07, 2016 11:44 am

How did you make the cone?

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40380Unread post Snug Music
Sun Feb 07, 2016 12:08 pm

aaron wrote:How did you make the cone?

hey Aaron,

have make this con with filmstripe 0,2mm.
the measurement is...
22mm on ground to 1,2mm and 25mm hight,
have these glued with 2k UHU and pocketed.
then subsequently immersed him in black paint.
Allow to dry for 12 hours and then glued to the membrane.

regards Scotty 8) :wink:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40383Unread post Snug Music
Sun Feb 07, 2016 12:42 pm

Measurement

Red Feedback blue is Signal

8) :wink:
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40389Unread post Snug Music
Sun Feb 07, 2016 3:19 pm

How set the Cone... 8) :wink:

:!: the cone is for the Red-Car-Part Tweeter not for original Souri Tweeter!!! :!: :!:
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40392Unread post Snug Music
Sun Feb 07, 2016 4:27 pm

I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 40393Unread post sakuszi
Sun Feb 07, 2016 4:56 pm

Great job! [Work makes perfect]
Your head will record perfectly! :D
You do not have the required permissions to view the files attached to this post.

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40396Unread post Snug Music
Sun Feb 07, 2016 5:08 pm

sakuszi wrote:Great job! [Work makes perfect]
Your head will record perfectly! :D
hey Saku,..

Yes! :mrgreen: just like on a drawing, this is the geometry of the dynamic cutting head!
The mass agree perfectly!
just as it is right!
regards Scotty 8) :wink:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 40398Unread post sakuszi
Sun Feb 07, 2016 5:25 pm

we ,you need to quickly dispel the myths about Souri cutter head, yes? do you agree with that? for $ 11k, you can buy 10,000 speakers, the rest aluminum costs $ 10 per 1000 grams :oops: :)

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40401Unread post Snug Music
Sun Feb 07, 2016 5:50 pm

sakuszi wrote:we ,you need to quickly dispel the myths about Souri cutter head, yes? do you agree with that? for $ 11k, you can buy 10,000 speakers, the rest aluminum costs $ 10 per 1000 grams :oops: :)

hey,..

This is no longer a secret.
has since Mark unlocked the mystery, it has long been publicly here.
The technique is old behind it.
That you can read if you have internet ..hihi :mrgreen:
I actually only made it to the user or people who handle the VR as secondhand purchased to help to repair these.
it has been found that I once rebuilt a head to see how this works, particularly the channel separation was interesting.
I such a result have now achieved, has totally blew me away.
will tinker with the head still and make these with proper feedback.
We will see!

Scotty 8) :wink:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 40402Unread post sakuszi
Sun Feb 07, 2016 5:54 pm

:mrgreen:
two heads are many a, want to invest even in 20, 50 different sets of speakers, it would be good if they get speakers from SIEMENS, SIEMENS produces tweeters for exclusive cars Mercedes, but these speakers is the Mercedes badge, the Speakers diamonds 8)

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40404Unread post Snug Music
Sun Feb 07, 2016 6:09 pm

sakuszi wrote::mrgreen:
two heads are many a, want to invest even in 20, 50 different sets of speakers, it would be good if they get speakers from SIEMENS, SIEMENS produces tweeters for exclusive cars Mercedes, but these speakers is the Mercedes badge, the Speakers diamonds 8)
hehe..yes! :mrgreen:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 40408Unread post sakuszi
Sun Feb 07, 2016 7:35 pm

it is copied patent US BACHMAN 1962 RECORD CUTTER 8)
You do not have the required permissions to view the files attached to this post.

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40409Unread post Snug Music
Sun Feb 07, 2016 8:43 pm

Yeah,..looks like a Scully :wink:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 40422Unread post Snug Music
Mon Feb 08, 2016 1:31 pm

dyn_Head rebuild
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!

User avatar
Thelurker
Posts: 88
Joined: Mon Dec 08, 2014 1:15 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 40431Unread post Thelurker
Mon Feb 08, 2016 8:20 pm

Good thread! I also experienced this exact same problem earlier last year....Souri head blew on one side for no reason, then while trying to troubleshoot the other side went to 1ohm!
Are the original Souri tweeters 4ohm?

Hey Scott! Can upload a high quality recording or video of a cut from the redcar tweeters?

User avatar
aaron
Posts: 203
Joined: Sun Sep 04, 2005 4:51 pm
Location: USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 40432Unread post aaron
Mon Feb 08, 2016 8:45 pm

So it seems like the stylus holder is the last piece of the puzzle. For that I'd think you'd need a tapered reamer. Has anyone done anything else?

Post Reply