Some questions about record pressing.

Once you have cut a master laquer, you have metal stampers created and have records pressed from them. Discuss manufacturing here. (Record Matrix Electroforming- Plating, Vinyl Record Pressing.)

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
The_House_Records
Posts: 43
Joined: Wed Aug 16, 2017 1:51 pm

Some questions about record pressing.

Post: # 47579Unread post The_House_Records
Thu Aug 17, 2017 11:14 am

Hi guys, i'm a new user on the forum and I have a few questions about vinyl record pressing.
How cheap could you get a record extruder and record trimmer used?
Also, mossboss was suggested that you need ALOT more than just a record press, extruder, trimmer, boiler, pumps, compressors, and water tanks. What gives? Based on what I was told at Third Man Records, It seemed like a relatively simple process with relatively simple equipment.

Thanks. :D

User avatar
The_House_Records
Posts: 43
Joined: Wed Aug 16, 2017 1:51 pm

Re: Some questions about record pressing.

Post: # 47582Unread post The_House_Records
Thu Aug 17, 2017 3:42 pm

I'm 11 BTW

User avatar
Aussie0zborn
Posts: 1822
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:

Re: Some questions about record pressing.

Post: # 47636Unread post Aussie0zborn
Thu Aug 24, 2017 6:03 am

Thanks for posting. Good to see you're interested in this industry. You might like to think about studying engineering or business management or both. It's seems that might suit your interests. A

Any industrial process is often more complex than it seems.

Post Reply