Spray booth for silvering

Once you have cut a master laquer, you have metal stampers created and have records pressed from them. Discuss manufacturing here. (Record Matrix Electroforming- Plating, Vinyl Record Pressing.)

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
meyer.jon1988
Posts: 3
Joined: Tue Jan 16, 2018 9:46 pm

Spray booth for silvering

Post: # 48977Unread post meyer.jon1988
Wed Jan 17, 2018 8:50 pm

My interest in vinyl production is on the galvanic end. I've been trying to find some leads on a silvering booth (preferably one with an automated spinning plate) and while I've seen videos of them, I'm having a hard time finding any for sell. Does anyone know where I can start. I'm looking for new and used. 

User avatar
Aussie0zborn
Posts: 1822
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:

Re: Spray booth for silvering

Post: # 48985Unread post Aussie0zborn
Thu Jan 18, 2018 7:33 am

You can easily make one.

Spinning turntable at 45 degree angle, motor at 78rpm (variable speed could be handy), a double nozzle spray gun, a sink, a cabinet, some fume extraction and you're good to go. Think about where the water will drain to.

User avatar
meyer.jon1988
Posts: 3
Joined: Tue Jan 16, 2018 9:46 pm

Re: Spray booth for silvering

Post: # 48990Unread post meyer.jon1988
Thu Jan 18, 2018 1:57 pm

I have looked into making one myself. However, I was trying to find one that would spray itself.

Thanks

User avatar
jrk
Posts: 1
Joined: Fri Dec 15, 2017 7:06 am

Re: Spray booth for silvering

Post: # 49028Unread post jrk
Sun Jan 21, 2018 5:46 am


Post Reply