Neumann console upgrade and replacements

Topics regarding professional record cutting.

Moderators: piaptk, mossboss, tragwag, Aussie0zborn, Steve E., Simon

Neumann console upgrade and replacements

Unread postby SopranoC » Sat Aug 19, 2017 5:49 am

Hello, not found others posts about this topic on the forum.
I would like to replace the Neumann console for the cutting room, had a look on a fully digital console with Neve and Universal Audio plugins.
Have you hardware/software or solutions to recommend?
Thanks!
SopranoC
 
Posts: 7
Joined: Tue Mar 17, 2015 2:57 am


Re: Neumann console upgrade and replacements

Unread postby flozki » Sat Aug 19, 2017 7:02 am

if you can wait until beginning of the year. fully booked out until end of the year.

check:
http://www.flokason.ch/fs_flokason_gear.html
around 6k
or
http://www.vinylium.ch/platform/content/element/40/master-control-front_xl.jpg
around 18k

also 4 channel monitor controllers and everything you need to replace neumann stuff.

please direct email. no pm's i almost never check in here.
flozki
 
Posts: 477
Joined: Fri May 19, 2006 4:40 am
Location: switzerland

Re: Neumann console upgrade and replacements

Unread postby SopranoC » Sat Aug 19, 2017 7:20 am

Good ones, but also looking for modern ones!
SopranoC
 
Posts: 7
Joined: Tue Mar 17, 2015 2:57 am

Re: Neumann console upgrade and replacements

Unread postby gold » Fri Sep 01, 2017 1:16 pm

If you want a four channel console your options are very limited. If you are willing to use a DDL then there are many more possibilities. Like a Maselec MTC-1X.
gold
 
Posts: 310
Joined: Tue Apr 28, 2009 12:03 am
Location: Brooklyn

Re: Neumann console upgrade and replacements

Unread postby SopranoC » Fri Sep 01, 2017 7:48 pm

gold wrote:If you want a four channel console your options are very limited. If you are willing to use a DDL then there are many more possibilities. Like a Maselec MTC-1X.


I have fully Maselec outboard EQ, Compressor, Limiter, Deesser and also MTC-1X.
I'm looking for the best solution to connect the new mastering console with the Neumann AM32 with VMS66 amp and SX68 cutterhead.
Any ideas?
Maybe Apogee?
SopranoC
 
Posts: 7
Joined: Tue Mar 17, 2015 2:57 am

Re: Neumann console upgrade and replacements

Unread postby gold » Sat Sep 02, 2017 6:51 pm

It sounds like you need a DDL. I don't know what is currently available. TC Electronics is a good place to check.
gold
 
Posts: 310
Joined: Tue Apr 28, 2009 12:03 am
Location: Brooklyn


Return to Vinyl Mastering, Lacquer cutting, Pro's and others

Who is online

Users browsing this forum: Bing [Bot] and 2 guests