etching graphics into a 14" lacquer disc

Topics regarding professional record cutting.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
prof msg
Posts: 27
Joined: Wed Mar 09, 2011 9:35 am
Location: Toronto
Contact:

etching graphics into a 14" lacquer disc

Post: # 47148Unread post prof msg
Mon Jun 19, 2017 3:01 pm

Hi,
I've been asked to get a lacquer etched with an image from a graphics file. I'm assuming laser is the standard way to do this? I'm not sure what type of equipment is best or who offers such a service. Anyone have experience with this?

-Kevin

User avatar
Soulbear
Posts: 525
Joined: Tue Nov 04, 2014 11:56 am

Re: etching graphics into a 14" lacquer disc

Post: # 47150Unread post Soulbear
Mon Jun 19, 2017 4:31 pm

Hi There,
Todd @ Deep Grooves Mastering is your Man,
Check out this :- https://www.lathetrolls.com/viewtopic.php?f=15&t=4137&p=41338&hilit=groove+graphics#p41338
Regards
:wink: :P :D Soulbear

User avatar
misjah
Posts: 223
Joined: Thu Jan 20, 2011 1:42 pm
Contact:

Re: etching graphics into a 14" lacquer disc

Post: # 47427Unread post misjah
Mon Jul 24, 2017 3:59 pm

I do....here's one I did for Dr Martens record

I'm almost never here so best contact me on www.24mastering.com
You do not have the required permissions to view the files attached to this post.

User avatar
chinaski
Posts: 7
Joined: Mon Nov 02, 2015 8:45 am

Re: etching graphics into a 14" lacquer disc

Post: # 52262Unread post chinaski
Thu Jan 31, 2019 4:23 am

Hi there,

updating this post as I'm currently looking for someone able to do this in Europe (except 24Mastering).
Any idea please?

Thanks a lot in advance!

c.

Post Reply