caruso infos. new link

Topics regarding professional record cutting.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
flozki
Posts: 571
Joined: Fri May 19, 2006 4:40 am
Location: switzerland
Contact:

caruso infos. new link

Post: # 48406Unread post flozki
Thu Nov 09, 2017 5:17 pm

hello
unfortunately the vinylike.de site took a french leave.
so all info's was gone too.
but vinylike.com is still around.

here again the most important stuff. will put more stuff whenever i find a minute. check from time to time.
but most you need is there. also a video about calibration and
some links infos to pressed records where the master is done with a caruso head, system. there are a few out now who use caruso only to cut masters sucessfully..

check
http://www.vinylike.com

and yes
a very nice video of a nice thorens lathe rebuild by a swiss guy. custom made controller.all midi controlled. head drop.lift.
caruso head. caruso preamps. current meters. qsc gx3 amp.

https://www.rts.ch/play/tv/nouvo/video/graveur-vintage-pour-vinyles-modernes?id=9042703&station=a9e7621504c6959e35c3ecbe7f6bed0446cdf8da

User avatar
FredH
Posts: 3
Joined: Sun Feb 14, 2016 8:41 am

Re: caruso infos. new link

Post: # 48466Unread post FredH
Thu Nov 16, 2017 1:38 pm

Just remember this post about the caruso ;-)


User avatar
tragwag
Posts: 1259
Joined: Wed Jun 22, 2011 2:30 pm
Location: Providence, RI USA
Contact:

Re: caruso infos. new link

Post: # 56997Unread post tragwag
Mon Oct 12, 2020 12:07 pm

anyone able to pick up a caruso? despite emailing for a few years I've had no luck or direction towards an actual purchase
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com

User avatar
handcut
Posts: 252
Joined: Thu Oct 16, 2014 5:41 pm

Re: caruso infos. new link

Post: # 56998Unread post handcut
Mon Oct 12, 2020 2:23 pm

tragwag wrote:
Mon Oct 12, 2020 12:07 pm
anyone able to pick up a caruso? despite emailing for a few years I've had no luck or direction towards an actual purchase
+1

Post Reply