ZEZ Cutter One

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, mossboss, tragwag, Aussie0zborn, Steve E., Simon

Re: ZEZ Cutter One

Unread postby Vice Fiori » Fri Jun 30, 2017 12:34 am

The reason why myshank cut from site it´s because, as you already said "you need finish and than put to sell" that´s what they doing right now...
Soon I´ll post videos of my productions too, i trust in both of then, special on ciuens, who i see this project at front, since the begin...
They´re working really hard, by their own, part of people just appear to try to get some piece of meat and go way (even angulo).
That´s why everything get a cool down, or it going to take more time...
I´ll come back with videos on process as they will too
Vice Fiori
[MGS] - K7's n Vinyl
User avatar
Vice Fiori
 
Posts: 37
Joined: Fri Jan 03, 2014 1:29 pm
Location: Brazil


Re: ZEZ Cutter One

Unread postby yano » Fri Jun 30, 2017 3:31 am

Vice Fiori wrote:The reason why myshank cut from site it´s because, as you already said "you need finish and than put to sell" that´s what they doing right now...
Soon I´ll post videos of my productions too, i trust in both of then, special on ciuens, who i see this project at front, since the begin...
They´re working really hard, by their own, part of people just appear to try to get some piece of meat and go way (even angulo).
That´s why everything get a cool down, or it going to take more time...
I´ll come back with videos on process as they will too


I trust MY SHANK and Ciuen. I ordered and paid for the Zez Cutter in May.
I look forward to being patient. All beginnings are difficult.... :)
yano
 
Posts: 32
Joined: Sun Sep 11, 2016 1:56 pm

Re: ZEZ Cutter One

Unread postby Vice Fiori » Fri Jun 30, 2017 11:40 am

yano wrote: I trust MY SHANK and Ciuen. I ordered and paid for the Zez Cutter in May.
I look forward to being patient. All beginnings are difficult.... :)


Everything on this kind of things need to be patient, even I stop for a time with my posts on my work to make new things and come back do post right, on the heat of the moment we´re all want to show what we had to o offer, and we only going to see all the hard work if get more close, i see it by myself, it´s a really really hard work and investment that maybe we never get this money back.. but love.. F*** this kind of love work just tell you something like "nevermind about it"... haha
Vice Fiori
[MGS] - K7's n Vinyl
User avatar
Vice Fiori
 
Posts: 37
Joined: Fri Jan 03, 2014 1:29 pm
Location: Brazil

Re: ZEZ Cutter One

Unread postby Vice Fiori » Fri Jun 30, 2017 11:48 am

Yano, dont worry, you´re going to get a great thing, updated and more impressive as you buy that time, they´re doing a great work giving their blood..
An that´s the reason why I getting my time on work. Make they cry man... make they cry....
(And... Sorry guys, dont get me wrong please, i know a bunch of you going to ask about, it´s a verry verry "secret" new work and a very very personal recipe, but i cant resist to show´t to you...)

Image
Image
Vice Fiori
[MGS] - K7's n Vinyl
User avatar
Vice Fiori
 
Posts: 37
Joined: Fri Jan 03, 2014 1:29 pm
Location: Brazil

Re: ZEZ Cutter One

Unread postby audiosteam » Tue Aug 01, 2017 8:50 am

Hey Yano did you got your order yet?
audiosteam
 
Posts: 15
Joined: Fri Sep 16, 2016 6:18 pm

Re: ZEZ Cutter One

Unread postby yano » Tue Aug 01, 2017 10:41 am

audiosteam wrote:Hey Yano did you got your order yet?


There is nothing... :( Just wait and wait.....
yano
 
Posts: 32
Joined: Sun Sep 11, 2016 1:56 pm

Re: ZEZ Cutter One

Unread postby audiosteam » Thu Aug 03, 2017 3:05 pm

I need to say that I'm VERY glad that I didn't bought it before you as it appears that they bluffing, by announcing it as available and saying that they've already sold many units. The unique proven user here is Vice Fiori, a friend of Ciuens. There are no other proven users at the moment as far as I know.
Now it's clear that they put the cart before the horse. But it seems that they learned from that mistake and working hard on finishing their stuff. I believe that they are good willing, the time will tell, and future users. But they should really work on their communication to make it look more pro.
Meanwhile I got an old lathe and I'm working on it.
audiosteam
 
Posts: 15
Joined: Fri Sep 16, 2016 6:18 pm

Re: ZEZ Cutter One

Unread postby The Shank » Thu Aug 03, 2017 4:47 pm

audiosteam wrote:I need to say that I'm VERY glad that I didn't bought it before you as it appears that they bluffing, by announcing it as available and saying that they've already sold many units. The unique proven user here is Vice Fiori, a friend of Ciuens. There are no other proven users at the moment as far as I know.
Now it's clear that they put the cart before the horse. But it seems that they learned from that mistake and working hard on finishing their stuff. I believe that they are good willing, the time will tell, and future users. But they should really work on their communication to make it look more pro.
Meanwhile I got an old lathe and I'm working on it.


No

We've decided to upgrade many parts in others material... after I've requested that condition. Now it's being produced.
http://www.myshank.com
skype : steven.myshank

* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
The Shank
 
Posts: 255
Joined: Tue Jun 15, 2010 11:02 am
Location: France

Re: ZEZ Cutter One

Unread postby Thelurker » Sat Aug 12, 2017 4:09 pm

audiosteam wrote:I need to say that I'm VERY glad that I didn't bought it before you as it appears that they bluffing, by announcing it as available and saying that they've already sold many units. The unique proven user here is Vice Fiori, a friend of Ciuens. There are no other proven users at the moment as far as I know.
Now it's clear that they put the cart before the horse. But it seems that they learned from that mistake and working hard on finishing their stuff. I believe that they are good willing, the time will tell, and future users. But they should really work on their communication to make it look more pro.
Meanwhile I got an old lathe and I'm working on it.


Hate to say it but I've been saying this all along! The cracks were there from the start.

Lack of videos, lack of response, lack of manual that was promised last January and so on!

Hope you get your product as promised Yano or your money back ASAP! I would not have waited this long if I paid in May!
Thelurker
 
Posts: 59
Joined: Mon Dec 08, 2014 2:15 am

Previous

Return to Experimenters' & Innovators' forum

Who is online

Users browsing this forum: No registered users and 5 guests