Lyrec Motor Speed Stabilization

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:

Lyrec Motor Speed Stabilization

Post: # 46519Unread post opcode66
Wed Mar 29, 2017 5:50 am

First step in getting the speed of the Lyrec platter motor to be stabilized. No loss of torque. Not overtaxing on the motor. Clean power. Not a modified sine wave.

The next step will be to add feedback. That will turn the AC Synchronous motor into essentially a BLDC system.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio

User avatar
Voxster1965
Posts: 81
Joined: Tue Apr 21, 2015 11:38 pm

Re: Lyrec Motor Speed Stabilization

Post: # 46524Unread post Voxster1965
Wed Mar 29, 2017 6:37 pm

Excellent work opcode

Post Reply