Analog Mastering/Direct-to-Master Recording/Engineering

Who are you? Tell us about yourself, get feedback, and provide links to your work.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
jesusfwrl
Posts: 365
Joined: Thu May 16, 2013 2:24 pm
Location: Earth
Contact:

Analog Mastering/Direct-to-Master Recording/Engineering

Post: # 48700Unread post jesusfwrl
Tue Dec 12, 2017 2:04 pm

Analog Mastering, Direct-to-Master Recording, Engineering Services
latheSetup.jpg
I cut lacquer masters on a custom Neumann-based AM44 system, using some of the finest analog vacuum-tube based signal processing equipment, and high-end cutting amplifiers, which I developed.
mu.png
massive.png
sideways.jpg
rack-s.JPG
greenfb.png
I specialise in cutting masters directly from tape, on a 100% analog signal path. I have a huge variety of tape machines to choose from, both preview head and standard. I do not use digital delays. When I'm cutting from standard, non-preview-head tape machines, I use manually variable pitch. Otherwise, Pitch13 does the magic.
telefunken.png
jesus-MCI-Lathe-cropped.jpg
studer.png
revox.png
akai.png
I can even cut directly from cassette tape, very popular with DIY artists, standard or 3.75 ips.
ant.png
antHS.png
Of course I can also cut from digital files if needed, PCM up to 192 kHz/24 bit and DSD up to 5.6 MHz.
tascamda.png
On special occasions, I cut on a heavily modified Fairchild lathe, dating from the 30's.
c2.JPG
In the past I was cutting PVC blanks with a heated diamond stylus and I also experimented with a variety of materials for blanks and styli.
x-ray-800pix.JPG
jesus-embossing-800pix.JPG
I also offer analog direct-to-master recording services, either direct-to-disk, or direct-to-tape (mono or stereo), for artists and groups who can perform entirely live.
recording.jpg
In addition, I often design custom professional audio equipment and electronic circuits. I specialise in vacuum tube electronics and unusual circuits of my own invention.
growl.jpg
growler.jpg
curreg-f.jpg
NADamp-s.jpg
fbox.png
I offer consulting services and can design or modify audio equipment and installations to your requirements. I also modify, repair, and restore all manners of vintage audio equipment.

Image

Image

As and when time permits, I can offer restoration, repair and modification of disk mastering systems. I can also design and manufacture custom parts to keep you going. If you're looking to buy a disk mastering system, feel free to ask me. I might have one for sale, or at least know where to get you one.

Image
Image

Image
Image
Image

Image

I also often have professional tape machines available for sale, and I also restore/repair/modify these. If you are looking to buy a tape machine, contact me. Preview head machines for disk mastering are also possible.
I can supply rare types of vacuum tubes as well, I have a big stash.
tubetester-s.jpg
In the past I was designing Analog Modular Synthesizers and even put together a video synthesizer.
bob.png
Don't hesitate to get in touch if you have any interest in what I do.
You do not have the required permissions to view the files attached to this post.
~~~ Precision Mechanical Engineering, Analog Disk Mastering ~~~
Agnew Analog Reference Instruments: http://www.agnewanalog.com

Post Reply