First Dumb Questions: DMM vs Lacquers?

Introduce yourself! Recommended for people who are just starting out, as opposed to experienced lathe cutters who are new members.

Moderators: piaptk, mossboss, tragwag, Aussie0zborn, Steve E., Simon

First Dumb Questions: DMM vs Lacquers?

Unread postby NeuroToniK » Wed Jul 12, 2017 12:20 pm

Hi,

I understood some of the technical difference between these two ways of cutting & I heard about the differences for the final LP. Better high frequencies with DMM, better bass with lacquers...
I have few questions, if you don't mind:
- wich one of these two techniques is the "easiest"?
- are they record cutting lathe "specialised" in DMM, or can we use the machine for both (with different head)?
- is there any supplier of metal for this?

If you any point of view on DMM vs Lacquers?

NtK
NeuroToniK
 
Posts: 6
Joined: Fri Jul 07, 2017 5:41 am


Re: First Dumb Questions: DMM vs Lacquers?

Unread postby NeuroToniK » Fri Jul 21, 2017 3:29 pm

Hello everyone,

I've heard that DMM machines are very rare, and actually almost impossible to find... So part of the answer is here.
I found a very interesting book, from the Audio Engineering Society, wich is an "Anthology of articles on disk recording". I start its lecture and found answers.

NtK
NeuroToniK
 
Posts: 6
Joined: Fri Jul 07, 2017 5:41 am


Return to Newbie Forum

Who is online

Users browsing this forum: Gridlock and 3 guests