Please help me identifying material on VR cutterhead.
Hi.
I hope some of you can help.
I somehow managed to lose the plastic looking bit (seems for damping) that goes around the metal bit that joints with the diamond holder. I am sorry, I don't know the word for it but please have a look at the attached photo.
Could anyone tell me what material is (teflon) and possibly its thickness so that I could try to find a replacement?
Thanks in advance.
I hope some of you can help.
I somehow managed to lose the plastic looking bit (seems for damping) that goes around the metal bit that joints with the diamond holder. I am sorry, I don't know the word for it but please have a look at the attached photo.
Could anyone tell me what material is (teflon) and possibly its thickness so that I could try to find a replacement?
Thanks in advance.
Re: Please help me identifying material on VR cutterhead.
Could it be teflon?
Re: Please help me identifying material on VR cutterhead.
Souri's himself skin sample
http://www.myshank.com
skype : steven.myshank
* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
skype : steven.myshank
* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
Re: Please help me identifying material on VR cutterhead.
The Shank wrote:Souri's himself skin sample
Besides that, any other suggestion, please?
- dubcutter89
- Posts: 359
- Joined: Thu Oct 19, 2006 6:30 am
- Location: between the grooves..
Re: Please help me identifying material on VR cutterhead.
do you have a channel inbalance?
added resonance to the channel without souris skin?
it looks like some standard tubing that has been cut longside to pull it over right? then why not try some different stuff (wire insulation?) and report back?
Lukas
added resonance to the channel without souris skin?
it looks like some standard tubing that has been cut longside to pull it over right? then why not try some different stuff (wire insulation?) and report back?
Lukas
Wanted: ANYTHING ORTOFON related to cutting...thx
Re: Please help me identifying material on VR cutterhead.
Silicone hose used in aquariums...