Angulo Records lathes of Argentina....wah huh?

Distinct from the "Members Only" section about business disputes, this is a section for those special few sellers who have distinguished themselves through clearly intentional efforts to scam multiple customers. If you intend to start a thread here, please check it with Steve E. first.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Angulo Records lathes of Argentina....wah huh?

Post: # 31258Unread post Steve E.
Sat Sep 06, 2014 1:11 pm

I am starting a thread because there's a surprising lack of information about this company: Angulo Records. They are based in Argentina.

We have one recent user, Miguel AKA sunkingrecords, who has one and is learning to use it.

http://angulorecords.com/

Apparently the company it is run by a guy named Raul. Is he not a member here?

There are a few threads that address the lathe, all by Miguel. Is it possible that the other users of the lathe are not on this site? Is it a language problem?

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: Angulo Records lathes....wah huh?

Post: # 31259Unread post Steve E.
Sat Sep 06, 2014 1:17 pm

ANGULO RECORDING
R-E-D Serie Pro 2.0 (RED Serie Pro 2.0)

(link on facebook says "Edición limitada............USD$ 6.875")

https://www.facebook.com/AnguloRecords
dsc06800.jpg
dsc06830.jpg
Grabador fonografico

Modulador de ancho de surco

Control de temperatura por caída de tensión

Regulador de profundidad de corte

Reproductor USB auxiliar control digital

AUTOMATICA controlador programable de tiempos y espacio: inicio de disco, pista 1 a 10, espacio/tiempo10sg entre pistas, sierre de disco, posicionado de cabezal a punto inicial, retroceso, fin de disco elevador de cabezal con habilitador de caída

Modulador de ancho de onda analógico/digital (potencia/ frecuencia)

Direccionado de vector

Grabación sentido horario /antihorario

Vumetro de potencia

Entrada de potencia externa

Regulador de altura y Angulo de brazo porta cabeza

Regulador de Angulo de ataque

Cabezal articulado para cambio de diamantes de corte

Suctor de corte

Conmutador automática/manual

Peso total :50kg.
Medidas: 57x62cm.x 35cm de alto
Potencia:300WRMS estéreo
EQ RIAA INTEGRADO …
Cerebro controlador automático
Sistema de entrada USB PC AUX
*Tiempo de grabación 27 minutos* por lado en 12″
You do not have the required permissions to view the files attached to this post.

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31260Unread post Steve E.
Sat Sep 06, 2014 1:31 pm

Translation of the above:

Recorder phonograph

Groove width modulator

Temperature control by voltage drop

Cutting depth regulator

Player Auxiliary USB digital control

automatic digital programmable controller of time and space:
start of the disk, track 1 to 10,
space/time10sg between tracks,
Sierre disk,
positioned to head to the initial point,
reverse,
end of disk head lift with enabler

Width modulator analog / digital waveform ( power / frequency )

Recording vector clockwise /counter clockwise

VU meter power

Check external power

Height adjuster and holder arm angle head

Controller Attack Angle

Articulated head for changing cut diamonds

Cutting suctorial ("cutting sucking mouthparts" :D)

Switch automatic / manual

Total weight: 50kg .
Measurements: 35cm high 57x62cm.x
Power: 300WRMS stereo
RIAA EQ INTEGRATED ...
Brain automatic controller
USB PC System AUX input
* Recording time 27 minutes per side * 12 "

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31261Unread post Steve E.
Sat Sep 06, 2014 1:32 pm

Sistema Automatico

automatic system:
sistema-automatico.png
You do not have the required permissions to view the files attached to this post.

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31262Unread post Steve E.
Sat Sep 06, 2014 1:36 pm

DISCOS DE VINILO VIRGEN

VIRGIN VINYL RECORDS

Los discos vírgenes en su composición de un 60% de Poli-cloruro de vinilo con agregados de polímeros especiales para el proceso de corte.

Comúnmente muchos confunden el discos de acetato con los discos de vinilo y discos de vinilo virgen

Se recomienda estudiar el tema

Blank discs as constituted 60% of poly - vinyl chloride with added specialty polymers for the cutting process .

Commonly many confuse with acetate discs and vinyl discs virgin vinyl

It is recommended to study the issue
946249_532184453493751_914424261_n.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31263Unread post Steve E.
Sat Sep 06, 2014 1:51 pm


User avatar
sunkingrecords
Posts: 88
Joined: Sat Feb 15, 2014 12:25 pm
Location: Argentina
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31265Unread post sunkingrecords
Sat Sep 06, 2014 2:07 pm

Hi Steve!

I can add that I don't know anybody else who has the machine.
I'm still learning, as you said. At the moment, I don't have the system fully installed (I lacked a proper turntable at first, working on that now, and also lacking the heat lamps and a good vacuum for the chip pickup), so I can't confirm good results on the machine, but mostly by my fault.

I have an on/off comunication with this guy Raul, because he is at the moment relocating to another country, but he has been helpful at first when I made the first attemps. For example, I haven't seen the last video where he explains the "automatization" controls (the part with the USB drive, which by the way only reads MP3 :( ).

I'm not sure if he knows about this forum.

About the virgin records, I don't like them too much, as they tend to warp easily and are very light. I can ship you a few if you or someone wants to try them. I could use a second opinion on the quality of the material.

Kind regards

Miguel
I choose not to run .-

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31269Unread post Steve E.
Sat Sep 06, 2014 3:58 pm

Thanks for the offer! Send them to someone else to test. I am not up and running enough at present to help.

I extended an invite to Raul today. He should be here.

User avatar
SUNBEARS
Posts: 82
Joined: Fri Apr 12, 2013 8:44 pm
Location: Los Angeles, CA
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31271Unread post SUNBEARS
Sat Sep 06, 2014 4:47 pm

Love the design, but would have been easy enough to have included a vacuum system, not unlike Souri's VinylRecorder. Also, the torque will probably be an issue if you're going to be putting significant weight on the cutterhead / platter. Maybe not for 7", but definitely anything with a bigger diameter. However, looks like Raul included lots of great features. Love the automatic system. That's one thing I would like to have with my vinylrecorder. However, even tho VR is fully manual, I'm getting great results. Can't complain!!

Good luck, Miguel!! Beautiful looking machine!
The loudness war is over, if you want it! - http://www.berlinmastering.co

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31277Unread post ROLANDJAYS
Sun Sep 07, 2014 12:35 am

I emailed him.... now we wait.
I wonder how much he charges, because argentina dollar is .12 of American dollar... mean 6500$ argentia = 775$ us....

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31299Unread post Steve E.
Mon Sep 08, 2014 10:10 am

It says specifically USD.

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 31310Unread post ROLANDJAYS
Mon Sep 08, 2014 9:23 pm

he responded, gave out some fair prices.
he sells the whole unit , or just the cutter head or just the amp.
so that's cool for some of us that just need the head and amp.

email him to see for your selves.

User avatar
Vice Fiori
Posts: 94
Joined: Fri Jan 03, 2014 12:29 pm

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 35095Unread post Vice Fiori
Mon May 18, 2015 1:42 pm

sunkingrecords wrote:Hi Steve!

I can add that I don't know anybody else who has the machine. I'm still learning, as you said. At the moment, I don't have the system fully installed ....

Hi miguel..
I know Im late, but think it's good make an up from this post..
I look this machines months ago, and I still interest...
I think buy maybe the version 2, or even the economic, only to test and see what this machines can offer...
Do you have some new results, almost 1 year after?
I dont know anyone who get this machines too, i hear some sounds, look'n great, but i think the better view is the point who really have one and tell us... Think you're the chosen one.. ahahah

User avatar
angulorecords
Posts: 16
Joined: Wed Sep 10, 2014 8:49 pm
Location: sudamerica
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 35717Unread post angulorecords
Fri Jun 26, 2015 7:24 pm

Raul: really had no idea of this, but I think I had good predispocicion with Miguel even travel to your city to help personally .
to show results with the machine

I'm here to clarify things and answer questions ,

They must agree not to speak ill of something that is not known

User avatar
angulorecords
Posts: 16
Joined: Wed Sep 10, 2014 8:49 pm
Location: sudamerica
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 35720Unread post angulorecords
Fri Jun 26, 2015 9:50 pm

A chemical that removes vinyl records and then re- record them an invention ANGLE RECORDS

https://www.youtube.com/watch?v=8tlnYvXVPkg

User avatar
angulorecords
Posts: 16
Joined: Wed Sep 10, 2014 8:49 pm
Location: sudamerica
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 35736Unread post angulorecords
Sat Jun 27, 2015 11:49 pm

Recording a recycled vinyl discs with chemical AS


https://www.youtube.com/watch?v=cMlJp9xUFGc
A former Christian music disc is erased with the chemical AS,
eliminating old regristros slots enabling new records , in this case registered ELECTRONIC MUSIC " TRANCE "

User avatar
The Shank
Posts: 338
Joined: Tue Jun 15, 2010 11:02 am
Location: France
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 35738Unread post The Shank
Sun Jun 28, 2015 4:48 am

I would prefer hearing the recorded signal from/on this cutted blank, the original signal and the unmodulated groove :?
http://www.myshank.com
skype : steven.myshank

* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe

User avatar
Big Al
Posts: 37
Joined: Wed Feb 19, 2014 10:59 pm

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 35739Unread post Big Al
Sun Jun 28, 2015 5:34 am

Interesting!

So with this chemical you are able to strip away the top layer of a pressed record and then cut it?
And you are able to cut it with a Sapphire?

On the video the chip looks white or clear - is this a byproduct of the chemical used?
I would have though chip from a pressed black record would have been black no?

Please let us know more details and like The Shank said please make videos where we can hear more - a direct recording from the audio output of the turntable playing back the record - not from a camera mic if you can do it would be amazing!

Very interested to find out more, as someone who's likes to recycle, the prospect of recycling old records to be able to use for Lathe Cuts is VERY VERY APPEALING!

Thanks Raul!

User avatar
uvoscillator
Posts: 129
Joined: Wed Aug 22, 2012 1:37 am
Location: Russia, St.Petersburg

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 35759Unread post uvoscillator
Mon Jun 29, 2015 5:56 am

Big Al wrote: So with this chemical you are able to strip away the top layer of a pressed record and then cut it?
And you are able to cut it with a Sapphire?
I can suppose that record was just covered by that fluid "pvc-secret-formula" and old grooves still there ))
Best !

User avatar
angulorecords
Posts: 16
Joined: Wed Sep 10, 2014 8:49 pm
Location: sudamerica
Contact:

Re: Angulo Records lathes of Argentina....wah huh?

Post: # 35763Unread post angulorecords
Mon Jun 29, 2015 9:52 am

Thanks for the suggestions and I am always open to criticism contructivas

here a video with audio directly online


https://www.youtube.com/watch?v=dYleVQ2bnuA

Post Reply