Ebay : VANROCK Disc Cutter

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, mossboss, tragwag, Aussie0zborn, Steve E., Simon

Ebay : VANROCK Disc Cutter

Unread postby Ganzha » Sat Feb 25, 2017 7:38 am

User avatar
Ganzha
 
Posts: 17
Joined: Fri Jan 03, 2014 9:08 am
Location: Germany, bayern


Re: new VANROCK

Unread postby Aussie0zborn » Sat Feb 25, 2017 7:54 am

Use the search function here and search for "vanrock".
This machine was also marketed as "Atom".
search.php?keywords=Vanrock
User avatar
Aussie0zborn
 
Posts: 1530
Joined: Sat Mar 11, 2006 9:23 am
Location: Australia

Re: Ebay : VANROCK Disc Cutter

Unread postby pandapolar » Sun Feb 26, 2017 7:01 pm

great little cutter from Japan... i have one and its brilliant :) (for mono, embossed 7's) ;)
pandapolar
 
Posts: 76
Joined: Sun Jun 23, 2013 9:00 pm
Location: Australia

Re: Ebay : VANROCK Disc Cutter

Unread postby luke13 » Mon Feb 27, 2017 2:37 am

Hey Pondapolar one question for you thanks : I am lloking for a good solution for a stylus / needle for vanrock. Try to cut with a diamond stylus, good results but very small life of the needle. Now I find on ebay a guy that sell tungsten and 3 angle presto type needle for embossing. What do you use now? Thanks friend for help.
luke13
 
Posts: 17
Joined: Fri Sep 20, 2013 2:32 am

Re: Ebay : VANROCK Disc Cutter

Unread postby pandapolar » Mon Feb 27, 2017 5:35 pm

i use the embossing cones from a fellow troll i actually need to get more ... :) spray down the makrolon blank with a little Mr Sheen and cut (emboss) away... for a lathe cut, its quite good... lows are a bit muddy and because of the freq range of the head ... its obviously not hi fi at all but for bands that want some tour merch... its great!
pandapolar
 
Posts: 76
Joined: Sun Jun 23, 2013 9:00 pm
Location: Australia

Re: Ebay : VANROCK Disc Cutter

Unread postby mrlogikal » Fri Mar 10, 2017 12:29 am

Is there anyone willing to sell one of these machines? I seem to just miss it when one becomes available or don't have the ridiculous amount the person is asking for it at that exact moment. Trying to get the one machine I desire the most, seems to be the furthest and the least attainable goal I have set for myself since I started researching Record Cutting. It's very discouraging.. :cry:
mrlogikal
 
Posts: 9
Joined: Sun Dec 18, 2016 10:20 pm

Re: Ebay : VANROCK Disc Cutter

Unread postby piaptk » Fri Mar 10, 2017 9:26 pm

Jack kilby had one for sale a while back. I'll hit him up and send him here if it's still available.
Always looking for anything Presto 6N: Feedscrews, Cutting Heads, accessories, etc.
SHORT RUN PLASTIC CUTS!!! http://www.LatheCuts.com
piaptk
 
Posts: 1150
Joined: Fri Jan 25, 2008 4:40 am
Location: Olympia, WA

Re: Ebay : VANROCK Disc Cutter

Unread postby luke13 » Tue Mar 21, 2017 2:25 am

Hey pandapolar where do you find the embossing cones that you write? I try to cut with 3 angle type presto needles and also with tungsten but with very bad results. try to prepare surface with turtle wax and also with lighter fluid without difference. I don't know if the problem is the dics that are too hard. I would like to make flexis and try to cut standard pvc sheets for binding covers ( of fellowes) but nothing. Polycharbonate I think is a good solution but the min. thickness is 0,75-1,00 mmm .
luke13
 
Posts: 17
Joined: Fri Sep 20, 2013 2:32 am

Re: Ebay : VANROCK Disc Cutter

Unread postby Mulchefye » Tue Jun 27, 2017 1:23 am

i swear im gonna go to damn Japan to get one, hopefully for less than 4 grand....
"Music is the Key to the Universe."
-Rats 2012-
Mulchefye
 
Posts: 44
Joined: Thu Oct 25, 2012 12:15 am
Location: Saint Chrysostome, Quebec


Re: Ebay : VANROCK Disc Cutter

Unread postby corneliuswrecks » Tue Jul 18, 2017 8:53 am

After looking at the post, a big red flag appears. Seller is from the UK, item ships from Tel Aviv.
corneliuswrecks
 
Posts: 9
Joined: Thu Aug 25, 2016 6:36 pm

Re: Ebay : VANROCK Disc Cutter

Unread postby boryo » Thu Jul 20, 2017 5:10 am

corneliuswrecks wrote:After looking at the post, a big red flag appears. Seller is from the UK, item ships from Tel Aviv.


Hmm, not sure how you made your conclusion but let it be so, just saw the action and shared here :)
boryo
 
Posts: 19
Joined: Mon Jun 12, 2017 2:32 am


Return to Classifieds & tip-offs

Who is online

Users browsing this forum: antonn, Yahoo [Bot] and 4 guests