Japanese Lathe (Hara Recording Devices)

A spot for keeping track of especially cool (informative, fun) videos, photos, scans and other links about record cutting. (You can post them in other sections. Eventually they may end up here.) NOTE: Please put *Circuits, Schematics and Manuals* in the section with that name.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

User avatar
Steve E.
Site Admin
Posts: 1914
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:

Re: Japanese Lathe (Hara Recording Devices)

Post: # 40244Unread post Steve E.
Thu Feb 04, 2016 4:19 pm

From the yahoo page:

jasons200bars-img599x398-1450082430fkdodn27116.jpg
jasons200bars-img599x398-1450082430rhdf9927116.jpg
jasons200bars-img599x398-14500824301qgfow27116.jpg
Screen shot 2016-02-04 at 4.16.04 PM.png
Screen shot 2016-02-04 at 4.16.17 PM.png
You do not have the required permissions to view the files attached to this post.

User avatar
woodhog
Posts: 8
Joined: Thu Jan 31, 2008 11:20 am
Location: montreal

Re: Japanese Lathe (Hara Recording Devices)

Post: # 54649Unread post woodhog
Thu Dec 12, 2019 1:48 am

hi I recently got a very similar lathe. I think mine is the Hara 705 II . anyhow, I can't see the photos in this thread, maybe because the post is so old/ they are all out of focus. Any info about it would be helpful . There is a wickid buzzzz when I put it through the monitor . Do I need a voltage step down from 120 to 100 as it's a Japanese machine?
who cut one?

Post Reply