Moderators: piaptk, mossboss, Aussie0zborn, tragwag, Steve E., Simon
Great work. Please note my pictures are from a Sears Silvertone branded unit. It is a 3 speed turntable model.
Part numbers shown may only refer to Sears and not Wilcox Gay.
I have no idea if there are any modifications or diferences in the ones built for Sears. The mic on mine was hard wired in, though the schematic shows a plug and jack. I have seen an RCA (cinch to you in Europe) mic jack on some Recordettes. Mine has an RCA AUX (line in) jack which interrupts signal from the radio.
- Posts: 430
- Joined: Sun Jun 11, 2006 4:49 pm
- Location: San Jose, CA
Can you please post a high dpi picture of schematics for Wilcox Gay Recordette. I got the same one!
- Posts: 4
- Joined: Mon Oct 20, 2014 3:06 pm
sorry, I don't have the machine anymore
it was trashed years ago
but the schematics should be in any model so you ask around
- Posts: 241
- Joined: Thu Jan 25, 2007 4:52 pm
A reasonably legible schematic for the OJ Series can be found on page 1387 of the following .pdf.http://highgate.comm.sfu.ca/oldradio/vol_21.pdf
There's no parts list on this schematic, but the list on the schematic Tape posted is legible enough if you zoom in.
- Posts: 9
- Joined: Tue Dec 08, 2015 7:49 pm
- Location: Buffalo, NY
Return to Circuits, schematics and manuals
Who is online
Users browsing this forum: Yahoo [Bot] and 4 guests