FS: Vinylrecorder
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- dubcutter89
- Posts: 359
- Joined: Thu Oct 19, 2006 6:30 am
- Location: between the grooves..
FS: Vinylrecorder
For sale - used Vinylrecorder
Includes:
- Overhead Mechanics
- Stereo Cutterhead
- 19" Main Controller
- 19" Optimizer unit
- PSU
- Acessoires for Stylus change, Disc clamp etc...
- Power Amp (SoundLab G097F)
- some used diamond styli, a couple of blanks
NOT included:
- Technics 1210
- Microscope
- Vacuum cleaner
- cheesy mixer, metering...
Not my unit, I just was asked to take care of the sale.
The machine is located in Austria.
Send me your offers via PM.
Includes:
- Overhead Mechanics
- Stereo Cutterhead
- 19" Main Controller
- 19" Optimizer unit
- PSU
- Acessoires for Stylus change, Disc clamp etc...
- Power Amp (SoundLab G097F)
- some used diamond styli, a couple of blanks
NOT included:
- Technics 1210
- Microscope
- Vacuum cleaner
- cheesy mixer, metering...
Not my unit, I just was asked to take care of the sale.
The machine is located in Austria.
Send me your offers via PM.
You do not have the required permissions to view the files attached to this post.
Wanted: ANYTHING ORTOFON related to cutting...thx
Re: FS: Vinylrecorder
I would like, Im from Italy ... but who can teach me to use it?
- dubcutter89
- Posts: 359
- Joined: Thu Oct 19, 2006 6:30 am
- Location: between the grooves..
Re: FS: Vinylrecorder
As said it's not my unit and I don't have tons of experience on VR.
I just quickly put it together and did some test cuts to confirm it is in working condition.
If the unit is picked up locally I can show and give some introduction to record cutting.
I just quickly put it together and did some test cuts to confirm it is in working condition.
If the unit is picked up locally I can show and give some introduction to record cutting.
Wanted: ANYTHING ORTOFON related to cutting...thx
Re: FS: Vinylrecorder
I'm sure the real owner could teach you. I got mine used too and with the right help I was able to cut very good sounding hip-hop. I'm talking about less than 5 hours of practice I think you just need to calibrate it properly, the rest is practice and working on the small details.
Best,
Bob
Re: FS: Vinylrecorder
@dubcutter8 can you please contact me by email? m.sartori @ me dot com
Re: FS: Vinylrecorder
As Boryo said, its possible to learn online for sure, calibration is the biggest issue but with video chats it 100% possible, and have helped a few people do it like thisboryo wrote: ↑Sat Apr 17, 2021 4:36 pmI'm sure the real owner could teach you. I got mine used too and with the right help I was able to cut very good sounding hip-hop. I'm talking about less than 5 hours of practice I think you just need to calibrate it properly, the rest is practice and working on the small details.
Best,
Bob
Re: FS: Vinylrecorder
Super interested.. have pm'd you
- dubcutter89
- Posts: 359
- Joined: Thu Oct 19, 2006 6:30 am
- Location: between the grooves..
Re: FS: Vinylrecorder
This unit has found a new home - SOLD!
Wanted: ANYTHING ORTOFON related to cutting...thx