The Secret Society of Lathe Trolls

But all device is in perfect condition of use

and it's possible to sold my vms and my whife for 200 K ?

hi all

We have cleaned again the turntable
changed the vacum tube
removed the suspension box.

Replace all...

NOW IT'S DONE and run nice again.

Thanks to all.

Just a new post for another problem's...

My attention is now focused on the box. i test it tomorrow.
Now it's not the time to go in the studio. It's time to sleep if i can...

Hi After some tests.... Here's step was done for my problem : 1. i removed two elements of the turntable and it's was cleaned with isopropyl alcohol. 2. I removed vacuum and replace all connection to the lathe. Also the rear side : RS 132- RS 131, vacuum tube and the connection to the floating box. ...

I'm not at the studio today.
I'll come back on saturday for the next of the history.

Thanks to all for the support

Olivier

Sorry Mr Gold for the slide... but my english is not the best.

The slide is oiled and i'll chek for sure the heavy oil but you confirm about that, i have the good info.
I want to find a magnetic base to test it but i think the laquers is ok.

Olivier

Gold : What did you mean for slide in the first point ? The suspension box is good. How long time for replacement the oil in the turntable ? have you idea. I have a dial gauge but i have not a good system to fix it. I think the mesurement is not good with my system. Necessary i need good system to v...

ANDYBEE : between the aluminium table it's cleaned and under the aluminium table we have scratch (around center where screws are placed) but we have scratch since the beginning. I have tested with Transco & app. it's the same. If my turntable is not flat how is it that ok at a time and other time is...

HI all Trolls, i' ve a problem for the third time. obviously the turntable is not stable. under the plate of the vms 70, we have 3 screw to fix it. First and second time we have sold the problem but now it's impossible to solve the problem. Our measurements after replacement are 90μm - 115μm - 115μm...

We are a mastering studio for master & dubplate. Here's list of our gear. Speaker : PMC IB2S - GENELEC 8040 AMP : BRYSTON BSS 4T E.Q DIGITAL : - Weiss eq1(full) EQ ANALOGUE : Manley : Massive Passive COMP DIGITAL : Weiss ds 1 mk3 COMP ANALOGUE : Manley Stereo Variable Mu® TUBE TECH SMC 2BM GRAVURE :...

No body have news about the plant of Habib ?
Few month after no links, no video...

Hello
the isn't good on the website.
Impossible to join my webmaster for this error...
The real price is 22 € add at this 15€ for dubplate

Hello

I use in my studio YAMAHA SPX 2000 for the delay.
I won't use it in the mastering line.
Yes i use it just for the pitch.

CUBASE and DELAY plugg'in for the cutting lathe it's not good solution.
Good Delay is the BEST for your pitch control !

Here's for me

What's the difference from this hears ?
Who's can help me ?
Thanks for all ...

Olivier

Hello all fan cutter.

Sorry for my english...

I've a studio mastering in Belgium.
If you want you can look my config at tjis link :
www.finalstep.be

I'll take few moment in the next week for all details about us .

Olivier