The Secret Society of Lathe Trolls

Selling a DM Cutter console, for full preview / program vinyl cutting with inserts and offsets. A lot of people don't know these even exist, but its basically the same appearance and functionality as a normal Dangerous Mastering console, with double the amount of inputs, inserts and outputs and gang...

Confirmed sold everyone, thank you

Tentatively sold, pending payment tx

Hello, SX68 located in Los Angeles, serviced by Robbie a couple years ago, light use since as it was my backup. Has 74 style coil wire to take more heat (and possibly stiffer springs) in it now like the rest of Robbie's rebuilds. This was Neumann's cherry picked head for the photography in the VMS66...

Sold

Reduced price, now $13K

Clean SX68 cleaned by Roberto in Italy, he did not recommend a rebuild at this time... Feedback headroom -14db Similar yellow front as one on eBay, but clean with no lodged screws (this one was properly stored in box) Head resonance 905hz (springs very slightly soft) Good freq response, quite flat t...

Sold

For sale:

Scully 280 preview transport with 2 headstocks 1/4" and 1/2"... extra Studer heads, cabinet nice... no electronics

$1200 for pickup only, 90065 zip code in LA

PM me with info, thank you.

Let me know if you have one of these boxes sitting around / for sale.

Thank you!

Hello,

Looking for a spare pair of CE66 modules for a VG66 system. Also looking for a cover for one of those modules if avail.

Thanks...

And another here...

www.elysianmasters.com

Hey Greg! Thanks for this. Of course, that one is discontinued like the Neumann now lol. Looks like we'll need to walk around the mall / home depot / OSH until we find something.

I think I've found a couple originals from a seller in EU, but thanks for the information everyone. Also... if anyone has a nice substitute for the original chip jar let me know. I have the top lid piece and bottom holder, just looking for an appropriate glass jar that would work, or even an origina...

Yeah sorry, I'm referring to the vertically mounted wheel between the control box on the right and the lathe on the left. Probably 4-5" diameter plated.

Thank you.

Need a Flywheel... we're looking at some other options (fabricating etc) but if someone has a spare part they'd like to sell let me know...

This seller is non communicative, said she would get a head report then didn't, said she would repost both heads with new info and didn't, now says this head passes a "test cut" but won't get the head report. Hasn't answered emails or PMs. Buyer beware; I went another route. Talked to another potent...

emailed you,

Dave Cooley

For VG66 rack. Hoping for a couple of the large blank rack panels. Sal74 spacers would probably work as well.