The Secret Society of Lathe Trolls

Thank you Shank , yes I make them with a sort of dremel . I'ts working and I have good cuts with it . yes, cutting lathe will be soon on the market . I build the feedback cutterhead with controller . Cutting lathe will be arrive soon in Italy . Yes, I'm not the manufacture of the mechanical . I'm do...

MEDIA-TECH Vinyl Working Group in Europe http://www.media-tech.net Now that vinyl sales are projected to sell 140 million units in 2017 and with sales nearing the $1 billion benchmark for the first time this millennium it’s time to take advantage of pressing plants’ collective power and best practic...

Hi there , I have contacted them and asked for location and adress . and why they want to sell in the Netherlands ? I give a price and they said it's ok . they wanted to sell me 2 presses and a extruder . the rest was sold they said. now I see that after my questions everything is removed. So this i...

First thanks for all the good advices , yes I agree the recording was not good . I was wondering during the cutting why? my stylus heating was not working . I found out later that one wire from the heating was disconnecting one channel so a few dc volts flew over one channel away. also my sapphire w...

Sorry for this late answer , but let me explaine about 96 DB It has to do with the sensitivity . For example 96 db spl is the measurement 1 watt at 1 meter distance (spl is pressure level) The rule by 3db output you need double power So 93db needs 2 watt on 1 meter distance and 90db 4 watt on 1 mete...

Oke let's make a promise , because I work this week I don't have much time .
But at the end of this week saturday or sunday , I will cut a lacquer with a sinus wave on 22khz .
The whole thing I will film realtime , and put It on this forum.

https://www.facebook.com/ron.janssen.7393/videos/252596015159126/ https://www.facebook.com/ron.janssen.7393/videos/247090899042971/ I ask 1700 euro for the head , not good ! your get your money back. Also full support coil repair. . The coils are brand new , made this head last summer. If there are ...

Wat do you mean ?

Clariophone DMX 60
Selling one out of four dynamic cutterheads I have made . Frequency response 20hz till 22khz 96 db 4 ohm. aluminium body , high heat resistance , excellent clear sound.
fitts on a Neumann 320 cutting stylus .

I been in contact with them for more than a year ago , they give me lot of information , but i was confused by the steam plant drawing . Chris checked them in a discussion about a steam boiler a few month's ago with me. And i did also some resource . The conclusion was the drawing is not correct . I...

thanks , chris
For your advise ,your clarification was very clear .
Now I also see the many mistakes in the drawing , I sent .
And what could happen when I build a plant like this.
I don't wanna think about it , safety first .
So I leave the work for professionals

Ron

Thanks , Andy

The drawing off the steam plant is send by the manufactor off the press .
But it also confuse me why the cold water and steam come together before the valve .
What do think andy ?

Thanks cris, This explains a lot off questions . I know there will be a lot off study In my country 170 psi is the maximum without proofing. A friend off mine is a process engineer so he can help me to build a safety system. Also water treatment from the coolingtower I thinking about legionela disea...

thank you for your support , first I gonna explain what I gonna do. I wanna start a small pressing plant . I have one steam watervalve foreward and one backward on a hydraulic system Watertower with a waterflow 60 squaremeter/hour and a waterpump 2,25 kw goes to the heat exchancer and a reverse to t...

I agree with this story I know the brothers souri very well , I was one off the first who bought a cutting lathe in 2002 from theme . After many blanks I buy from those Guy's I had blow up my cutterhead not the first time . The problem was the lamp on the cutterhead when I forgot to put out my recie...

hi there,

I want to buy a steam boiler , it's a 180 degrees Celsius and 150 psi .
I know that i need for a single press about 150kg/h steam .
But this type off steam boiler makes 500kg/h .
Can i make less steam with a valve between it ?

Thanks

thank's for let me in on the forum .
It's a great site and i love it.