The Secret Society of Lathe Trolls

Thank you for your comments, im still trying to get the correct setup for myshank`s stylus. I`be back.

SueDenim: maybe the diamond are same size but, the exposed part is longer, also the whole Souri stylus. about 2mm in general.

I have just closed my first post about strange noises in my recordings, almost everything could be overcome but it brought up a problem that I think I should deal with separately. The distance between Hosskirch and Mexico City makes sending and receiving of Stylus incredibly slow (2 months) For this...

By way of closing my publication I would like to share with you the solutions we apply to our problem with the T560 1. The reason that made the stylus short-lived was a large amount of DC Offset (2 DCV) on one channel of the amplifier (Samson SERVO 600). It was repaired and it works fine now and we ...

Great all the tips here, i `ll take a moment to check vacuum details, and see if it`s time change anything. I`ve read that post and feel great about the David 34 solution, and a lot of info of interest. Now im getting to try all the things in the pitch motornoise (Bestseller hehe) says to find reaso...

Yes, Souri´s works fine but, maybe i have to wait 2 months for re-sharpening because de mail delays. That´s why i´m trying to use Myshank but, it have no right size for my cutterhead and causes problems with suction. The suction pipe is the original of the VR, and the vacuum is a industrial kind tha...

Discomo, the order is correct, i did the work like that, no doubt. yes i try to manage the drop of the cutterhead very carefully, but for the video im trying to show the whistle that comes when the stylus is close to pipe. After i sent the video i make a disc and found, one noise masks the other If ...

>Discomo The axis of the top bar is correct I did the check with the line on a disk as recommended by the myshank site. I increased the value of the green dial (21) and managed to lower the rumble a lot, anyway I will follow the advice of the link you share. And with that I just checked that Noise i...

> 2bitcomputer Yes sometimes I think that a Chaneke (a kind of naughty devil from Mexico) lives inside my machine. >jonty2k I did a new test of recording without a vacuum, my vacuum is in the next room about 2.5 meters from the wall where the machine is, I moved it to the other end of the room and r...

To tragwag.

About the audio chain.

I removed and put the plugin chain in the Logic master

I changed the audio interface

I removed and put every Souri´s hardware

I even re-recorded from a CD player

Change the amplifier

And nothing, the noise is still there.


Thank you.

For everyone reading, I have a sample of the noise that is killing my recordings Made with a new myshank stylus and a 12 " black 1.5 from Souri. You can hear the noise below the recording here. https://soundcloud.com/fiatsonus/vinyl-noises-on-record/s-mftVoXNbSmI sometimes the noise disappears or is...

Thank you for replying. grooves look fine and plays good with different turntables, no skips. sometimes i use my shank stylus at 15 g but a little wow comes. that´s why i choose to get back to the lower limit my shank tell. with souri´s i use 15 g new and 20 for used. I try to use the lower values i...

Hello, I am a VR T560 user, and I have read here everything I could about the machine, its handling, configuration and possible problems, before commenting on any post Now I am in the middle of a strong problem, I found this post, and I would like to know if you found a solution to the problem. Here...