The Secret Society of Lathe Trolls

As Ben mentioned, every head is different, I have three and all have a different frequency response, also inaccuracies in their dimensions affecting the sound. Souri implements his 'iRIAA' as a 3 band EQ in the main unit, usually a bass boost, slight mid dip and boost in the high end. I have mapped ...

Hey @PMST i didnt see your post, thank you for the tips. Sorry it was my mistake, you're totally right! Soon i will try to go directly from the daw to amp bypassing all units, one question, how do you measure the cutting volume inside the daw and how do you monitor the computer/phono signals at the...

Amp always goes direct to cutter head? It is the chain before the amp you wasn't to change. The cutter head has Speakon connectors that go to the amp,. The DIN plugs that you are talking about is for the motor and stylus heating, not audio. It is advisable to change out Souri's cheap electrics. Keep...

Yeah quite a few have them now, i'll be getting one myself soon. Only had positive feedback so far from studios i know personally.

No info on the cutterhead condition either, even a simple ohm reading. So along with the price and Reverb being riddled with scams, it's worth avoiding i'd say!

My friend got accepted for a VR today, so he is still making them, so as long as you made a well worded email which was less than a sentence in length, you might be ok!

I'm based in the UK but can ship worldwide.

I will be selling both of my Vinyl Recorder T560 cutterheads in the coming months, likely around mid April.

For anyone interested, i am open to serious offers, contact via PM.

All are now sold.

Thanks for all the feedback. The issue is now sorted. Strangely it was multiple diamonds causing this, i thought the odds of so many freshly 'resharpened' diamonds would never be the cause, low and behold, a set of new diamonds are used and order is restored.

I have 3 x Souri diamonds for sale, ideally as a job lot! All are used, but have plenty of life left in them.

Looking for £200 or best offer for the 3.

Again, check the impedance of the coils as then you can likely tell if it is a coil burnt out, or just a faulty cable coming from the head. One is an easy cheap fix, one isn't, so do this when you can.

Have you checked the impedance of the coils? Do that before taking anything apart

A few things have changed in my personal life and going to need a quick sale, so i'm dropping the price to £1500 + shipping for a quick sale.

Yeah i've swapped the players out and tried different sources, still the same.

I'm thinking it is just a send to Souri job, i cut a lot of discs, and have to cut loud so assuming at this point it is just wear and tear.

I have two VR heads, each head has been cutting around 200 to 300 discs each, per month for about 3 years. In the past days, both heads are getting some nasty distortion, sibilance in particular, but even well below 0dbu at 45rpm which i have never encountered before. I've tested the heads, both rea...

Signs of wear and a studio image!

I am selling my workhorse Technics SP10 MKII with SH-10E power supply and a custom plinth that is made specifically to fit under a cutter overhead, sat tightly next to the left overhead arm to avoid any clearance issues at the other end. The machine is in full working order, it has a few signs of we...

Hi! I cut on 3 different Vinyl Recorders. I have just moved house (and country!) which included driving my lathes 2500 miles. Before leaving i was cutting, everything was normal. I even tested all heads, every one was 4ohms on each side. Since arriving i've set up the 3 lathes and one of my heads ha...

It's likely just needing EQ. Like Tragwag said, what are you using for iRIAA? This is very likely to be your issue