The Secret Society of Lathe Trolls

I will soon figure it out as I have done with many other things.
Thanks for the heads up.

I understand what you are saying, good point but I can think of one thing I did that might have caused that failure but I can't confirm it yet. I tried shipping some to Australia for testing but the package never left Jamaica I got it back & went to TUFF GONG but they are under reconstruction now so...

Good & bad news. I did further modifications for all size discs. 10" & lower now have 4 point support and absolute no issues with those sizes. 12 & 14" discs now have 8 point support & things have significantly improved. Discs are now coming out quite a bit better than the industry 50% failure rate....

Tell Productions Inc. is a Florida (USA) based company with A research & development location in Jamaica.

14" discs still torturing me. I had to do further minor modifications to the set up & the 12" discs are now being efficiently made. 14" still leaking on the posts but not as much only 1 in the last manual run of 12 discs. The first side of them come out perfect but the second side is most times neve...

Okay I got all the stuff & the initial run after the upgrade was a MAJOR DISASTER. The racks leaked lacquer all over & I was very disappointed. Leaks.jpg After observing & noting the different failures I did some modifications and things are much better now although a bit different from the initial ...

1 more for dancehall fans:
https://www.youtube.com/watch?v=tVJeSByKeQM

You are right about the stress & health issues I had 11 tumors in me & prostate issues at 1 point from over exposure to VOC's. I had to buy a lot of equipment to monitor everything around me. It turned out that at home even the soap I bathed with & the laundry detergent was emitting VOCs. So even wh...

Items have finally been shipped so next month my curing rack setup will start to be upgraded in stages 1 rack at a time so production wont have to be halted. I will be able to make 12 & 14 discs efficiently there after. This format used to give me a lot of failures for 12 & 14" discs. from this wedg...

A few works voiced at my studio just in case you are interested in other services. https://www.youtube.com/watch?v=HOrr7D2xQh0&list=RDHOrr7D2xQh0&start_radio=1   (dub song) singles: https://www.youtube.com/watch?v=BnpFkBZHRMY Only Snow’s part was done at my studio https://www.youtube.com/watch?v=zYy...

No, I have not started to ship masters for production only for electroplating tests in UK USA & Australia. Since some processes are a little different its good to get feedback from a wide area in the industry. Back in the 90s I did not make masters only dub plates. I cant think of any reason from my...

Enough discs have now been baked and packed in shipping boxes. Still in the process, disc baking set up.jpg a continuous one, but I can start shipping discs now. Horizontal boxes are just for show empty boxes.jpg but all vertical boxes in pics are packed with discs 15 and 20 pack boxes..jpg but only...

Well you can now order from me. TELL PRODUCTIONS INC. Registered in Florida but Research & Development is in Jamaica.

WOW!!!! and nobody knows about faada TELL & dub cutting back in the 90s. Actually Tubby helped me build my first dub cutter tell lathe.png I used a IBM 3340 hard drive for mainframe system to make the platter & drive system. I disassembled 2 & used 8 platters to make my platter then I put a 14" LP m...

It took quite a while but it all worked out. I had to stop production after I got some old lacquer discs from the late 30s to late 50s. nbc discs.jpg I was shocked when I finally got my hands on them. They were properly stored looked very good & some of them sounded very good after so much time to m...

Take a decent/good quality pic of the stylus & let me see if the things i made to hold my stylus will work with urs.

How many do you need?

GOOD NEWS!!!!
I will be able to get 6 boxes on 15 pack 7" discs,, only about 35% of those were badly damaged,,, 90% of the 10 were.
SO I will still be shipping some soon.

I will update you when everything is ready to be shipped.

check this topic:

Light at the end of the tunnel

BAD NEWS,,,,,,,,Yesterday was a disaster,,, most of the 10" discs are damaged because I had them stacked horizontally & the weight was too much. Most have ugly impressions from the red silicone rubber as soft as it is. The lacquer even came off on the rubber when it was removed. The 7" are not bad b...