Search found 8 matches
- Sat Apr 18, 2020 4:08 pm
- Forum: Newbie Forum
- Topic: What is this fluid?
- Replies: 12
- Views: 1520
Re: What is this fluid?
Thank you very kindly!
- Sat Apr 18, 2020 12:26 am
- Forum: Newbie Forum
- Topic: What is this fluid?
- Replies: 12
- Views: 1520
Re: What is this fluid?
Is the cutting head pressed into the surface with a spring to allow for minute surface variations in the media or is the Z axis intended to be absolute?
- Fri Apr 17, 2020 3:36 pm
- Forum: Newbie Forum
- Topic: Driver size
- Replies: 2
- Views: 591
Re: Driver size
Thanks, Mark. I appreciate your response.
- Thu Apr 16, 2020 9:26 pm
- Forum: Newbie Forum
- Topic: What is this fluid?
- Replies: 12
- Views: 1520
Re: What is this fluid?
Thanks! I appreciate your insight.
Take a jean jacket out of petty cash.
Take a jean jacket out of petty cash.
- Thu Apr 16, 2020 4:24 pm
- Forum: Newbie Forum
- Topic: Driver size
- Replies: 2
- Views: 591
Driver size
I notice most of the DIY machines I see use midrange driver motors. They have a lot of heft. As I understand, groove depth is 0.030". A tweeter motor should have an X-max of 0.050" and a large tweeter 1.25" dome will probably be closer to 0.080". Double that, for X-diff of a full cycle and a tweeter...
- Thu Apr 16, 2020 4:12 pm
- Forum: Newbie Forum
- Topic: What is this fluid?
- Replies: 12
- Views: 1520
What is this fluid?
Dumb question.
Can someone tell me what flavor of apple juice is in the side mounted syringe at 0:22, and why it might be necessary?
[YouTube2]https://www.youtube.com/watch?v=jrZuSqOOFHw[/YouTube2]
Can someone tell me what flavor of apple juice is in the side mounted syringe at 0:22, and why it might be necessary?
[YouTube2]https://www.youtube.com/watch?v=jrZuSqOOFHw[/YouTube2]
- Tue Apr 14, 2020 8:16 pm
- Forum: Newbie Forum
- Topic: NEWBIE STARTER GUIDE!
- Replies: 32
- Views: 77627
Re: NEWBIE STARTER GUIDE!
To contradict myself..... This is pie in the sky but... I've thought about using a heavy carbide in a servo configuration. At 1/10 speed, you could manage significantly more weight and still get acceptable high frequency response, I believe. Before I threw out the idea of trying a closed loop cuttin...
- Tue Apr 14, 2020 3:55 pm
- Forum: Newbie Forum
- Topic: NEWBIE STARTER GUIDE!
- Replies: 32
- Views: 77627
Re: NEWBIE STARTER GUIDE!
Have somebody tried to cut using other type of material, like HSS or carbide or another "comercial" cutting or threading tools (lathe or mill)? I'm in a place that is VERY DIFFICULT and VERY EXPENSIVE to buy or import diamond or sapphire cutting stylus. Hi Lucas. I've considered something like a TP...