The Secret Society of Lathe Trolls

Not been used that much at all, fully working Link to ebay listing here for pics etc ... https://www.ebay.co.uk/itm/145075791627?hash=item21c730e70b:g:r44AAOSwQDZkW5mO&amdata=enc%3AAQAIAAAA4L8wh5Y%2FwDWVFwLQ1LAPmIzJtJ8oCqzyAdw01ckQPSluqYNCEdV%2Fb9JzkEOie0hAPq8Bk9MXuBGiwYE3OBUXrr2axq1L3OJS85pWBc%2BEk...

129 x 2mm (Black) 10" Myshank blanks
46 x 2mm (Black) 12" Myshank blanks

£250 for the lot

Based in the UK, ideally pick up would be best but can look into shipping if needed

DM if you need more info

Yep cut a silent groove with the cutting amp switched off, still get the same problem

So I have been having some issues lately. I have been getting noisy cuts after only x 10 cuts through the machine, lots of surface noise which has never happened before, does seem to be on one side each time and I cant seem to get to the bottom of it. I have wasted x 4 new styluses doing this. I rec...

Discomo wrote: ↑

Thu Jul 30, 2020 2:20 pm

Checked if the din connectors are tight?

Thanks, checked and all seem secure

When this happens, check to see if the drive nut is slipping. That nut is the only thing which connects the motor output shaft to the feed screw so it's vital that it works consistently. This may sound odd, but I've had more success with the drive nut turned the other way around. You could try taki...

Hey Guys First post here! Had my T560 for about a year now, great machine and has worked great until recently Im not sure what the problem is, but when I lock the winding screw to start cutting the crank will spin and then momentarly stop and then start again causing the head to stop and cut to deep...