The Secret Society of Lathe Trolls

receive a new stylus today and cut without any problem. do you compare the length of the shank with the previous one?

yes show up on the stamper as well, only appear on the lead in area

Hi Everyone
After being sent for plating, this kind of honeycomb pattern appeared on the outside of the lacquer. Has this happened to anyone? Although it is not very common, it happened once last year and once this year.

I can send you one, you want a father or mother stamper?

Dear Trolls,
I would like to ask which company can buy PET film specially used to produce picture discs?

Thanks,
R.

Hi Trolls,
May I ask does any one have the contact of TPC? I try to do some research but not found any result

Thanks

please pm me if anybody has a spare one for sale.

should it looks like a RIAA Curve?

my westerx head's coils replace recently, the feedback amp also get fixed recently, so I am not sure where the problem come from, not sure about what is the correct curve about the feedback amp

Hi Trolls, In the last few days I found that I have a lot of mid-to-high frequency distortion, but the westrex head sounds normal from the outside, so I checked the frequency response of the main power amplifier, it is very flat, but I checked the curve of the frequency response of caruso feedback a...

misjah wrote: ↑

Tue Jun 01, 2021 1:54 pm

You cut and press yourself?

yes, but sometimes cut by other studios

Aussie0zborn wrote: ↑

Tue Jun 01, 2021 8:42 am

Where are you located?

china

Phinster wrote: ↑

Sun May 30, 2021 11:50 am

try Stamper Disc in the UK

they are not able now

I have lots of lacquers need to silvering and plating, but it seems lots of plating company are not able to accept new client for now. so anyone know is there any company are still available to accept new client?

today I face a similar problem on my Scully which is very frustrated...the suction can not pick up the chip from the beginning, when I setting LPI on around 280, the chip can stand pick up for a few seconds, in other LPI setting, chip balls up immediatelyand I check all things again and again. 1.Tub...

Aussie0zborn wrote: ↑

Sun Mar 28, 2021 5:55 pm

Is that clear vinyl compound?

yes it is

it seems thing getting worse... we lower the temperature to 115 and 95 the cake surface still have burn mark

Martin and Aussie0zborn,thanks for your help! my pvc is new. we lower the temperature to 125(both heating unit)，the smell is gone and it looks much shiny and smooth now。 we extruded all the black compound out and put some new clear compound in it, it seems we have a new problem, the cake have some m...

Hi Trolls! Recently, our extruder has a very strange problem. When it extrudes PVC, it will produce a pungent sour smell. :shock: our tempature setting is 135 The extruded pvc cake has very rough edges and is very soft, as if there is a lot of air in it. Has anyone encountered this problem? Could it...

I am surprise that no one shows interested? is there any update?