Unfortunately, the promotion ended today.
The current price for a vacuum block is $1,800 (including $500 to keep this website alive).
Search found 82 matches
- Wed May 01, 2024 5:33 am
- Forum: Classifieds & tip-offs
- Topic: Vacuum bearing block for sale.
- Replies: 4
- Views: 743
- Tue Apr 30, 2024 2:44 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
I have to add something to this thread. It seemed that one sharp diamond could record at least several copper records, but it turned out that this was not the case. With one sharp diamond knife you can record only one hour in copper, and probably forty-five minutes and that's all, but trying to reco...
- Tue Apr 30, 2024 2:25 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
the cause of the whistling sound was a slightly dull diamond knife, the problem was solved, the quality of the copper recordings is fantastic
- Sun Apr 28, 2024 1:01 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
https://www.youtube.com/watch?v=q4dP32wlzCk
and here is a great recording and it is easy to distinguish vinyl from digital processing and S" is not distorted
and here is a great recording and it is easy to distinguish vinyl from digital processing and S" is not distorted
- Sun Apr 28, 2024 12:41 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
https://www.youtube.com/watch?v=yU_m-Jziuj4
S", how to eliminate these consonants because they are a disturbance?
S", how to eliminate these consonants because they are a disturbance?
- Wed Apr 24, 2024 2:07 pm
- Forum: Classifieds & tip-offs
- Topic: Vacuum bearing block for sale.
- Replies: 4
- Views: 743
Re: Vacuum bearing block for sale.
Hello . My turner friends made this module for me. I don't know what's inside this bearing block, I haven't disassembled it. The air goes through the shaft from the clamping sleeve side and flies out through the threaded hole [from the top of the housing] in the module housing and the air is sucked ...
- Sun Apr 21, 2024 12:01 pm
- Forum: Experimenters' & Innovators' forum
- Topic: The farmer and his plow - When I set out to build a record cutter
- Replies: 268
- Views: 6484102
Re: The farmer and his plow - When I set out to build a record cutter
We were thinking about such a solution for extracting copper chips, but unfortunately the relative vacuum pressure is too low and we had to decide on a much more powerful relative screw pump and, as a last resort, we used a supercharger compressor from a Volkswagen, [a real madness of noise], it mu...
- Sat Apr 20, 2024 3:50 pm
- Forum: Experimenters' & Innovators' forum
- Topic: The farmer and his plow - When I set out to build a record cutter
- Replies: 268
- Views: 6484102
Re: The farmer and his plow - When I set out to build a record cutter
We were thinking about such a solution for extracting copper chips, but unfortunately the relative vacuum pressure is too low and we had to decide on a much more powerful relative screw pump and, as a last resort, we used a supercharger compressor from a Volkswagen, [a real madness of noise], it mus...
- Sat Apr 20, 2024 1:07 am
- Forum: Classifieds & tip-offs
- Topic: Vacuum bearing block for sale.
- Replies: 4
- Views: 743
Re: Vacuum bearing block for sale.
[in case of sale, I devote half of the funds to maintaining this website]
- Sat Apr 20, 2024 12:56 am
- Forum: Classifieds & tip-offs
- Topic: Vacuum bearing block for sale.
- Replies: 4
- Views: 743
Vacuum bearing block for sale.
For sale is a bearing module, a bearing module, a self-lubricating vacuum one, for a lathe machine recording with a vacuum pressure of the plate from the bottom, there is an air suction hole from the bearing block and from the top of the shaft, the air sucked in passes through the sealing system and...
- Fri Apr 19, 2024 11:46 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Incredible nice Lyrec pictures
- Replies: 3
- Views: 784
Re: Incredible nice Lyrec pictures
Nice photos indeed. However, the control system is very outdated, I dare say that these two controller cabinets weighing at least 100 kg can nowadays be replaced with a stereo system with much greater efficiency and possibilities and with much lower distortions, and such a modern system can be fit i...
- Fri Apr 19, 2024 4:52 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
Hello, together with electronics we have developed a module for measuring the temperature of drive coils with a constant resistance of 4.7 Ohm and 8 Ohm. and current intensity directly when the online amplifiers are turned on, i.e. in real time while cutting the board on a lathe. You will need four ...
- Thu Apr 18, 2024 2:53 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
We are still testing the system, nothing is free, precision has to cost time, time is a very expensive element of this puzzle...
- Thu Apr 18, 2024 2:50 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
I'm considering buying such a multi-colored lamp for my lathe, I think it will go very nicely with the black granite base of my machine, what do you think, trolls?
- Wed Apr 10, 2024 1:14 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Weird grooves
- Replies: 15
- Views: 1910
Re: Weird grooves
low-frequency oil silencer below 10Hz
- Wed Apr 10, 2024 1:13 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Weird grooves
- Replies: 15
- Views: 1910
Re: Weird grooves
here is a photo of a primitive German lathe and setting the platter to the mechanical sensor, below is a low-frequency oil silencer below 10Hz
- Tue Apr 09, 2024 10:54 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Weird grooves
- Replies: 15
- Views: 1910
Re: Weird grooves
check whether the bearing suspension works smoothly and without any jams, and check the leveling of the skid plate base with a mechanical depth sensor, error of deviations on the outside
the diameter of the cap should not exceed 0.01 mm
the diameter of the cap should not exceed 0.01 mm
- Tue Apr 09, 2024 8:20 am
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
The recording is original, made with my machine and my DMM head
- Tue Apr 09, 2024 8:18 am
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
Hello, these very fine teeth are a recording of a frequency of 40 kHz with a level of 0 dB in copper, groove width 0.025 mm
- Fri Apr 05, 2024 3:46 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Professional vinyl record lathe step by step
- Replies: 53
- Views: 72631
Re: Professional vinyl record lathe step by step
We received the original galvanized stainless steel plate with great difficulty, it is a complete shock for us when it comes to the hardness of the copper layer. The situation is as follows: these COPPER MIRROR plates for DMM are VERY SOFT, it may be slightly harder than wax or hard paraffin or PVC ...