Search found 105 matches
- Wed Sep 28, 2022 10:44 am
- Forum: Secrets of the Lathe Trolls
- Topic: can crystal cutter heads be rebuilt?
- Replies: 5
- Views: 2575
Re: can crystal cutter heads be rebuilt?
He has turned me away in jan 2022.. Telling me he doesnt repaire them anymore.
- Mon Sep 12, 2022 3:02 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Messiner 1-9065
- Replies: 2
- Views: 8120
Messiner 1-9065
I Haven't posted in years.. Does anyone in town fix these machines, I wanted to cut my own Origional compositions on this device.. It means a lot to me, I don't know about vintage tube electronics. Need to be tought to get this working, Now working on a messiner, 1-9065... as my Bell labs RC-36 mode...
- Mon Jun 03, 2019 9:48 am
- Forum: Secrets of the Lathe Trolls
- Topic: First Cut + Swarf Issue
- Replies: 8
- Views: 2569
Re: First Cut + Swarf Issue
the needles may need sharpening,,, get a sharpening stone. and sharpen them in a cucrcular motion.
- Thu Nov 30, 2017 3:12 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Wilcox gay recordio
- Replies: 2
- Views: 1513
Re: Wilcox gay recordio
dont know if i'd swap one.. one goes with one and the other goes with that one correct ??
- Wed Nov 23, 2016 2:25 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Driving a dead M-41 Head. OK///
- Replies: 1
- Views: 636
Driving a dead M-41 Head. OK///
2.20pm Nov.23,2016 In Regards to the M-41 Presto head, in wich way would the amp be, would it run on tubes like most of them of that 1948 era.. Or would they be made of circuitry. So if it didnt come with an amp. There could always use copper wire and magnets to make it work...Just change the way th...
- Mon Oct 10, 2016 10:38 am
- Forum: Experimenters' & Innovators' forum
- Topic: piezzo crystals..
- Replies: 1
- Views: 744
piezzo crystals..
From: Chris Baker <chris@singlecrystalquartz.com > Fused Silica, Single Crystal Quartz Wafers Hello , Large selection of Fused Silica/Quartz and single crystal quartz (seeded and seedless) AT, ST, X, Z cuts available wafers in stock. From thin to thick SSP and DSP SMALL QUANTITIES available. Fused S...
- Tue Apr 12, 2016 8:57 pm
- Forum: Services
- Topic: Record cutter repaire --
- Replies: 3
- Views: 9971
Re: Record cutter repaire --
Hi, lathe trolls. been here off and on. looking for some people to help. with cutter repaire. looking around a lot. tracking down some people who help repaire heads,.. found this guy in -- Re [Record Players Public Group] Forum in facebook Kirk Laffman commented on his photo in Record Players. Kirk...
- Mon Feb 22, 2016 10:21 am
- Forum: Services
- Topic: Record cutter repaire --
- Replies: 3
- Views: 9971
Re: Record cutter repaire --
Marc rising star gets his parts from gib.. Marcs no help either.. guess the only help i will get is from magnets,. this is frustrating not knowing the math equation for wire coils.. its not like you can wire any amp onto a stereo. You need to wire it so the stereo wont fry,, You have to know how muc...
- Wed Jan 13, 2016 2:18 pm
- Forum: Services
- Topic: Record cutter repaire --
- Replies: 3
- Views: 9971
Record cutter repaire --
Hi, lathe trolls. been here off and on. looking for some people to help. with cutter repaire. looking around a lot. tracking down some people who help repaire heads,.. i found Marc Handschuh / Marc Rising Star <solutions@ultraelectronicactive.com>.. found this guy in -- Re [Record Players Public Gro...
- Sun Jul 26, 2015 9:52 pm
- Forum: Circuits, schematics and manuals
- Topic: Presto 5C Cutter Head Information or Manual
- Replies: 11
- Views: 5019
Re: Presto 5C Cutter Head Information or Manual
i think what e means is he had gib rewind the coild and file down the metal link making it sensative.. giving it a hi fi def groove.. The only reason i had him rewind one head and he reduce the 500 ohm coil in mine as well.. well he reduced the head, for what ever reason. to work with any 8 ohm ster...
- Sun Jul 12, 2015 8:28 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Recharge the magnet on a Presto 1D head,solve your problems.
- Replies: 35
- Views: 9093
Re: Recharge the magnet on a Presto 1D head,solve your probl
Neyodimimiummm Colbolt Steel.. cause i cracked mine in half with a hammer.. but my hammer was steel... not brass..
- Mon Apr 06, 2015 12:10 pm
- Forum: The Reference Archive
- Topic: How to drive a Piezo with an Arduino
- Replies: 0
- Views: 1034
How to drive a Piezo with an Arduino
Found this stumbled on a site this morning.. This actaully may be helpful. Hard to fins stuff like this on the interent, cause they either reference peizo as a salt or for display only. This drive a piezzo.. He stuggle d with this too,/... How to drive a Piezo with an Arduino - Instructables http://...
- Sun Apr 05, 2015 11:53 am
- Forum: Secrets of the Lathe Trolls
- Topic: Recharge the magnet on a Presto 1D head,solve your problems.
- Replies: 35
- Views: 9093
Re: Recharge the magnet on a Presto 1D head,solve your probl
i certainly oculdn't think of anything that complexx.. i dont have any knowledg. so to speak.. i dont mean to to say this but i am dumb.. in a way cause im not good with this stuff at all.. basic shapes and simple round figures maybe,, but not this,, your post helps a lott.. thxxxx. sir.
- Sun Apr 05, 2015 11:45 am
- Forum: Newbie Forum
- Topic: Welcome, Newbies! Say Hi in this thread!
- Replies: 387
- Views: 638233
Re: Welcome, Newbies! Say Hi in this thread!
Hi,,
sorry been on here for a year or two. just found this thread.. thought i d say hi.
cause i don't see anyone having a conversation with me. so HHHHHHIIIIIIIIIIIIIIIIII..
sorry been on here for a year or two. just found this thread.. thought i d say hi.
cause i don't see anyone having a conversation with me. so HHHHHHIIIIIIIIIIIIIIIIII..
- Sun Apr 05, 2015 11:28 am
- Forum: Newbie Forum
- Topic: Magnetic cutting heads versus crystal
- Replies: 6
- Views: 1993
Re: Magnetic cutting heads versus crystal
im curious about this as well. but not too much info as specs and how to build one either..??
- Fri Apr 03, 2015 5:12 pm
- Forum: Experimenters' & Innovators' forum
- Topic: mc 441 problems
- Replies: 7
- Views: 1687
Re: mc 441 problems
i am running the head to the plate in the back,, using no amp what so ever.. Direct liking like hooking up a speaker to a stereo,, same idea.. No i did not use a tube amp.. sorry that you think that ???
- Wed Apr 01, 2015 9:18 am
- Forum: Classifieds & tip-offs
- Topic: Presto Rebuild Kits on Ebay
- Replies: 7
- Views: 1813
Re: Presto Rebuild Kits on Ebay
i dont understand,, Whats the screw moutning thing for. Are these kits avaiable, and whats the price of the kit. What guage magnet wire will fitt,, i mean does it come with magnet wire all spooled.. And whats the going rate.. is it cheaper then 65.00 dallars.???? i thought the damper went through th...
- Fri Mar 27, 2015 10:08 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Cutterhead repair / rebuild service
- Replies: 25
- Views: 5589
Re: Cutterhead repair / rebuild service
Horizontal heads arent built like that.
- Fri Mar 27, 2015 10:04 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Cutterhead repair / rebuild service
- Replies: 25
- Views: 5589
Re: Cutterhead repair / rebuild service
there are two coils to make the cutting sensative ,, so that it cuts to disk.. giving it the extra vibrations to cut theg roove.. and leave permanent markings.
- Fri Mar 27, 2015 10:02 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Cutterhead repair / rebuild service
- Replies: 25
- Views: 5589
Re: Cutterhead repair / rebuild service
there are two coils to make the cutting sensative ,, so that it cuts to disk.. giving it the extra vibrations to cut theg roove.. and leave permanent markings.