The Secret Society of Lathe Trolls

Taking this opportunity, may be someone have useless master for press?

GAGARIN DYNAMIC CUTTERHEAD Good day for all lathe trolls. We are Studio NMCP from Russia. We built this cutterhead. We understand, dynamic heads never been perfect, but that is the way to get a good records. Video will tell you more. jU-ln2y-xHI If you have interest we can made test record for you. ...

Anybody knows something about "Capps Neumann sx 68" stylus? It is suitable for stereo cutting?

The heating wire on my neumann 320 stylus was broken. And I want to made new heating coil. What material from domestic environment I can use for this? I think may be used heating wire from soldering-iron, but it's has a high resistance (around 110 ohms) at similar length. It's not good, cause I must...

Hello!! anybody know how to contact with souri? I wrote him to the souri@t-online.de. but it can't be delivered, because his e-mail is not active. May be someone know where to buy appropriate cutting needles and vinyl blanks?

I have a full PDF. Let me know if you want to get it.

Hi, Looks like a nice job of construction. However, I think you have quite a bit of moving mass in your design. Given the large size of the drivers a the length of the members, you might be up against big losses in coupling the motion of the speakers to the stylus. You might want to measure the app...

Hi, Looks like a nice job of construction. However, I think you have quite a bit of moving mass in your design. Given the large size of the drivers a the length of the members, you might be up against big losses in coupling the motion of the speakers to the stylus. You might want to measure the app...

Here is my 45/45 selfmade cutterhead. I used a 3-watt speakers from a cheap sound system. Speakers are plugged in phase-inverted mode. I use the track from computer as a input signal. so I do RIAA correction in the program. I stuck a steel rod to the center of each speaker in the epoxy. Needle holde...

Hi, i'm from Russia. Sorry for my bad english. I design a homemade lathe from old scanner. And i have some results. Today i have good low-noise groove made by a steel 78 RPM stylus with a self-made heating coil. But this stylus don't record sound. i think there is two main reason: 1) unsuitable styl...