Thanks for the answer Herve, how was the pressed record? Did you recut many laquers of the 25 box? Are you still using mdc? I'm waiting for the tests press ...
Inviato dal mio ALE-L21 utilizzando Tapatalk
Search found 36 matches
- Thu Jun 28, 2018 3:11 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: MDC laquers
- Replies: 2
- Views: 1339
- Tue Jun 12, 2018 8:32 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: MDC laquers
- Replies: 2
- Views: 1339
MDC laquers
Hallo Cutters I recived for the first time a box of 14inch MDC japanese laquer this week, still no feedback from the galvanics but I noticed those two points: There are some irregularity in thickness in the outer diameter , that can be normal...but the silent groove oscillate from 55 to 75 um if I c...
- Fri Mar 09, 2018 7:30 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Box for 14inch master
- Replies: 4
- Views: 1178
Re: Box for 14inch master
Hallo! Thanks, check emailssalnikov wrote:Hello.
If you wish, I have a big stock of empty box for lacquers.
Contact me if you would like one?
Cordially.
Inviato dal mio ALE-L21 utilizzando Tapatalk
- Tue Mar 06, 2018 2:26 pm
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Box for 14inch master
- Replies: 4
- Views: 1178
Box for 14inch master
Hallo cutters!
Is there a place in europe where I can buy cardboard box for shipping 14inch masters? I already asked to tranco uk , no way they said...
How do you manage this...?
Thanks
Inviato dal mio ALE-L21 utilizzando Tapatalk
Is there a place in europe where I can buy cardboard box for shipping 14inch masters? I already asked to tranco uk , no way they said...
How do you manage this...?
Thanks
Inviato dal mio ALE-L21 utilizzando Tapatalk
- Wed Feb 14, 2018 9:26 am
- Forum: Classifieds & tip-offs
- Topic: Neumann VG66 Cutting Amplifiers
- Replies: 14
- Views: 2866
Re: Neumann VG66 Cutting Amplifiers
I'm trying to restore my Vg66 from 4 year now, the first year after recapping and a first calibration I cutted for 1 year with caruso head or sx68, I was nice, no perfect but I had the possibility to learn..... than I built a caruso system :) simple e nice sounding and in the meantime the vg66 was a...
- Fri Feb 02, 2018 9:04 am
- Forum: Classifieds & tip-offs
- Topic: Neumann VG66 Cutting Amplifiers
- Replies: 14
- Views: 2866
Re: Neumann VG66 Cutting Amplifiers
Hallo cutters!!! How many peple use the vg66 for everyday cutting?
Did you use with mods or original circuits?
Just courius...
I use it without hk66 and I don't
like the riaa premp for the pickup...
Pietro
Inviato dal mio ALE-L21 utilizzando Tapatalk
Did you use with mods or original circuits?
Just courius...
I use it without hk66 and I don't
like the riaa premp for the pickup...
Pietro
Inviato dal mio ALE-L21 utilizzando Tapatalk
- Sat Sep 30, 2017 4:52 am
- Forum: Circuits, schematics and manuals
- Topic: A Second-Order 12dB/Octave Elliptic Equalizer
- Replies: 2
- Views: 3179
Re: A Second-Order 12dB/Octave Elliptic Equalizer
Wow Wayne, great job!!!
Need to study for a while...
Thanks a lot!!
Inviato dal mio ALE-L21 utilizzando Tapatalk
Need to study for a while...
Thanks a lot!!
Inviato dal mio ALE-L21 utilizzando Tapatalk
- Thu Jun 29, 2017 9:57 am
- Forum: Newbie Forum
- Topic: New Project- Presto 14B / Caruso
- Replies: 71
- Views: 13754
Re: New Project- Presto 14B / Caruso
Good job Symatic! Did you already choose an inverter? I suppose is a 3 phase motor, but you can buy a 2 phase inverter that can supply a 3 phase motor, better if it has vectorial function, easy to install , with the possibility to be controlled via pot /switch And encoder or tacho feedback system f...
- Thu Jun 29, 2017 5:27 am
- Forum: Newbie Forum
- Topic: New Project- Presto 14B / Caruso
- Replies: 71
- Views: 13754
Re: New Project- Presto 14B / Caruso
Good job Symatic! Did you already choose an inverter? I suppose is a 3 phase motor, but you can buy a 2 phase inverter that can supply a 3 phase motor, better if it has vectorial function, easy to install , with the possibility to be controlled via pot /switch And encoder or tacho feedback system fo...
- Sat Mar 04, 2017 8:32 am
- Forum: Circuits, schematics and manuals
- Topic: Fairchild Model 600 Connex Schematic
- Replies: 8
- Views: 2751
Re: Fairchild Model 600 Connex Schematic
Good Stevie, that is true, it will be nice to make some cuts to try...tube warmt is always sexy...
Inviato dal mio ALE-L21 utilizzando Tapatalk
Inviato dal mio ALE-L21 utilizzando Tapatalk
- Sat Mar 04, 2017 5:29 am
- Forum: Circuits, schematics and manuals
- Topic: Fairchild Model 600 Connex Schematic
- Replies: 8
- Views: 2751
Re: Fairchild Model 600 Connex Schematic
Thanks for share! Is there someone cutting with this outboard? How it sound?
It will be nice to develope a pcb for the community
Maybe not difficult a point to point build to try ...
Inviato dal mio ALE-L21 utilizzando Tapatalk
It will be nice to develope a pcb for the community
Maybe not difficult a point to point build to try ...
Inviato dal mio ALE-L21 utilizzando Tapatalk
- Thu Feb 16, 2017 6:29 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Lyrec Motor sm8 parts
- Replies: 0
- Views: 1251
Lyrec Motor sm8 parts
Hallo Trolls!! I'm doing a revision of my lyrec motor that has 50 years old....I found the skf 63052 bearings , but I still did not disassemble it . In the past I changed the rubber bushing with and adapted hard rubber black antivibrator but i think they are not the right ones... If someone can shar...
- Mon Aug 01, 2016 5:38 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: AM32b / VA62g users
- Replies: 6
- Views: 2138
Re: AM32b / VA62g users
Hehe dramma is quite appropriate word to describe the picture sometimes....
Inviato dal mio iPhone utilizzando Tapatalk
Inviato dal mio iPhone utilizzando Tapatalk
- Fri Jul 29, 2016 9:30 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: AM32b / VA62g users
- Replies: 6
- Views: 2138
Re: AM32b / VA62g users
Thanks Lukas , mine too...
- Thu Jul 28, 2016 7:55 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: AM32b / VA62g users
- Replies: 6
- Views: 2138
Re: AM32b / VA62g users
Thanks Voxster! maybe you have a different pitch unit but the pitch brake sistem must be the same ... is it normal for you the 100 mA braking current in fixed pitch operation? I' m just fixing my tube variable pitch unit...
- Mon Jul 25, 2016 3:20 pm
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: AM32b / VA62g users
- Replies: 6
- Views: 2138
AM32b / VA62g users
Hallo Trolls!! I'm looking for friends that cut everyday with AM32b and VA62g :) Never saw onother one in my short experience and will be great to share some or just ask some question about them! For example : is it notmal to have a braking current of 100 mA at fixed pitch? (variable pitch disconnec...
- Thu May 12, 2016 6:40 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Neumann VA 62g Relays
- Replies: 5
- Views: 1241
Re: Neumann VA 62g Relays
Thanks Radardoug, this is a siemens type ... The gruner has only two row of pin... and a central screw....
Maybe i have to upgrade all the socket and relay...
Inviato dal mio iPhone utilizzando Tapatalk
Maybe i have to upgrade all the socket and relay...
Inviato dal mio iPhone utilizzando Tapatalk
- Wed May 11, 2016 6:57 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Neumann VA 62g Relays
- Replies: 5
- Views: 1241
Re: Neumann VA 62g Relays
Thanks mossboss !!! The problem is that I can't get the right model number....not easy to find...
RS code is welcome....
Inviato dal mio iPhone utilizzando Tapatalk
RS code is welcome....
Inviato dal mio iPhone utilizzando Tapatalk
- Fri May 06, 2016 1:43 pm
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Neumann VA 62g Relays
- Replies: 5
- Views: 1241
Neumann VA 62g Relays
Hello trolls! I'm trying to find a modern replacement for the old relays in the pitch control unit va62g The brand is Gruner ref 955. Has someone already changed them? Thanks http://uploads.tapatalk-cdn.com/20160506/17708c023c8854192ff355220055d48a.jpg Inviato dal mio iPhone utilizzando Tapatalk
- Wed Aug 05, 2015 8:16 pm
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: control panel
- Replies: 15
- Views: 2233
Re: control panel
Micro space astronaut!!!
Inviato dal mio iPhone utilizzando Tapatalk
Inviato dal mio iPhone utilizzando Tapatalk