The Secret Society of Lathe Trolls

Dear Tasos,
I'd like to take this opportunity. I hope paypal is okay for you.
Thank you!

Dear Fellow Trolls!

I'd like to a ask some help! I recently bought a kingston overhead, and i'd like to resize my cutterhead design to fit perfectly onto the overhead mechanism.

If you have a SC-99 and have some time to take measures, please reach me here, via private message. Thank you!

BIG thank you Ben, for the detailed photos, now we have a name and a part no, awesome work guys!

I got one of these "Reverse Modules" on ebay years ago and I believe it is the same motor as is inside that tube : Maybe you can buy one from Souri? Interesting, it certainly looks similar from that small photo. You got it from eBay? There's no chance with Souri, he ghosted me years ago and such he...

"it was covered in a LOT of gaffer tape"

OMG, if its the factory solution, its a big disappointment....

Can you take some photos? For example, Souri uses papst motor and controller for the external platter motor, but he cleaned the brand/type...

Its a really noisy thing, i used one, i installed at my cellar with a 8 meter hose.
I changed it to a "Rietschle Picolino VTE 3" much lower noise level, but its still installed in an another room.

I just found an interview with the maker, i hope its gonna be on ebay within days

CosMoO have you one motor? what dimension have the alu ? depend of the dimesion we have 40 kg torque or 150 :) But depend too from the wats and rpm. Please, can u send me how is the messure ? thx a lot ! Ruben I never own vinylrecorder, just searched the info based on this forum and various pictures.

Ask MyShank about the precision plate

https://idt.ebmpapst.com/content/dam/ebm-papst/idt/germany/products/Brushless_external_rotor_motor_VD_VDC_EN_2017_05_b.pdf Here is! the motor and the conector... i try this month Nice catch rubenr! Sorry Luke, i never tried to identify the specific motor/driver configuration, if you check the pdf t...

Hey!
If you check the pictures about the external platter motor/driver unit, there is a silver box, it is a papst motor controller, and the motor unit also the same manufacturer, but they carefully cleaned al the brands/logos and part numbers from it.

Steve E. wrote:This looks to be a big deal.

https://www.wired.com/story/phonocut/

BOONE ASHWORTHGEAR10.10.2019 09:00 AM

Cut Your Own Vinyl Records With This $1,100 Machine
”

From Kickstarter:

"The next 45 people get PHONOCUT for €700 off the €1999 retail price."

So technically it will cost 2K?

As i mentioned in the subject, i'd like to buy the indicated part to my new lathe.

I'm from the EU, i can pay via Paypal.

Thank you for the offers!

Status update!
The digital jewel scale went total crazy because the D1 magnet. Every measurement went to negative sign, so i droped this solution. Next one will be a micrometer scale like myshank mentioned http://www.myshank.com/scale.jpg

OR Any other idea? Thank you guys!

After a big break, i came back to the cutting. I almost finish my lathe, i bought a diamond and blanks from myshank, but i'm not sure about the cutterhead weight measure. I use a jewel scale, at the same height as the surface of the blank. I set the weight, but its seems too light, its 15.6 grams I'...

My biggest dream, a real Scully lathe, it's stays a dream

I hope it finds a new loving owner and get back to cutting business.

A little update to my little thread.

3D printed bobbins, remagnetizing, 4.5 meters of 0.2 mm diameter copper wire and some lacquer. TADA! (And a cup of Kefir )

Next project a 320 styl adaptor.

Bump!
Anybody out there?

ROLANDJAYS wrote:that looks good ! is it 3d printed?

Thanks! Of course, 100 micron layer height, 0,5 mm thickness

Hello fellow trolls! I'd like to buy a broken, worn out, totally unusable neumann stylus, i only need a 100% intact metal taper. The reason is, now i cant afford a new myshank stylus, but i really want to move forward with my DIY cutterhead. So please, i need a little support. EU sellers in priority...