The Secret Society of Lathe Trolls

cant pm the seller for some reason, anyhow..

hi,

is it a vinylium kingston dubplate cutter or the vinylrecorder t560, by souri?

(if its a t560) is the cutting head a feedback type?

where exactly are you based in the south?

cheers

seen a pic of it on the transition facebook page, sweet as..

yep!

hi, thanks for the info. i had read that a vms 60 existed but thinking about it perhaps it was just a reference to the 6 series in general http://firstcask.blogspot.co.uk/2008/12/some-record-cutting-lathes.html so anyway in that case i'm looking for either a vms 62 special, 66 or possibly 70. cheers

same here, i went a bit silly on the bidding but i chose a limit to stick to and then yh someone with 1 feedback has now bid it right upto £2500+. too much for that i think. still i would liked to have owned it.

cheers

damn, look at the price of that rek-o-kut now..

i know i may be late to the party but i thought it could still be worth putting a wanted ad out.

at this moment in time i'm looking for either a vms 60, 66 or possibly 70 depending on its price.

complete cutting package preferred.

cheers

hi guys,

could the es59 somehow be compatible with a rek-o-kut tr43h?

cheers

yo guys, yh i joined up on lenco an read up a bit on whats what with the controller thing etc. that seems a fairly straight forward way of sorting out the speed issue, i think thats not too out of my depth. but would simons solution work out just as well and cost about the same? anyway would there b...

nice one guys, very helpful indeed. thank you i dont own the rek-o-kut but i've had my eye on the one which is in the classifieds at the moment. i'm trying to gauge what it will entail to get it working properly if i did come to own it. if i knew i could somehow get it spinning at the correct speeds...

hi steve, thanks again for the info. i found this thread here on lathe trolls: https://www.lathetrolls.com/viewtopic.php?f=1&t=995&hilit=rek+o+kut+50hz if you scroll down you see simon mention something about using a car dc 12v with a 30amp regulated power supply. i dont know what those bits are or ...

hi guys,

just wondering if theres any advice on changing the voltage with a 110v rek-o-kut for use in the u.k.

i've read that using a convertor will also change the frequency but this means the rek-o-kut spins slower.

how would you solve that issue?

cheers

thanks for the info man,

yh if it wasnt so pricey i'd go see it and buy if all seemed well. i'll keep my eye on it i guess.

cheers

thanks for the tip off!

how much is this machine worth do you think guys and what kind of quality might this thing cut?

can or does it cut at 33/45 rpm?

cheers

found this on ebay uk:

http://www.ebay.co.uk/itm/RECORD-CUTTING-MACHINE-BY-M-S-S-RECORDING-CO-FOR-DIRECT-ACETATE-DUB-PLATES-COLD-/301052154252?pt=UK_Records&hash=item46181b518c

does anyone know anything about this machine? seems a bit pricey mind..

cheers

yo guys..

hows it going, its been a while. i've been thinking lately 'i so want a dubplate cutter' (again) so i thought i'd put out a wanted ad here on lathe trolls, the best place to do so.

i'm in the u.k. if theres anything decent about then please let me know,

cheers

this threads 'subject' pretty much covers what my question is and so any suggestions or feedback much appreciated.

cheers.

opcode, cool man, i hear ya.. thanx for your info, always appreciated. pete! your kind & amazing offer is.. well, simply amazing! cheers. how can i refuse. i'll send a similar type 'dance' tune that souri recieved (20hz - 18khz - or wd u prefer smthin with more of a cut freq. range either end?) and ...

hey guys, yh i believe im almost fully familiar with the all sorts of different types of 'plates' that can be/are cut in realtime (thanx to this site and its users, cheers). i guess i could have been more clearer in my enquiry, but yh basically im just after only a max 10 cuts; so just on the 1 side...

ok so it seems that perhaps either there isnt a service suitable for my requirment or perhaps ive kinda been ignored (i dont know?)... it was shortly after i posted this thread that i noticed another user of lathe trolls mentioning in his own thread something about problems with an oversea client - ...