The Secret Society of Lathe Trolls

Is this still for sale? Sent a PM but got no answer....

Hi all,
Trying to figure out why my machine is stopping randomly during most cuts, creating a locked groove and destroying styli!... The O ring is suspect number one as it's showing it's age and is slipping.... Does anyone know the correct size, so I can get a replacement?

Thanks Flo, just sent an email to you. The machine isn't new, I just meant that I bought it new from Vinylium

Help needed please guys. I have a Vinylium Dubcutter which is giving me nightmares at the moment, with the feedscrew stopping randomly anywhere during a cut. Already destroyed 2 styli today. Decided first to have a look at the half-nut and feedscrew in the cavity behind the cutterhead, and I found a...

David34: And here' smy question which has not been answered ever.. I didn't find an answer in Audio Mastering books, here and everywhere else. So the question is why cutterhead must be pararell to the blank? I did some tests and I'm not hearing anything bad. But when I set my cutterhad pararell, my...

Ok I get that, thank you. Leads me to the obvious question... Is anyone making these, or does anyone have drawings of it so I can get one made? Thanks.

Thanks Myshank, Your time and answer is very much appreciated. I checked out your website and if I get this going I will come to you for blanks and diamonds.... Thank you. Because I want to cut both lacquers & PC discs, and the fact that I know a great toolmaker.... Rather than swap a whole componen...

Hi everyone, Is there anyone out there cutting these type of discs using a diamond stylus on a Vinylium machine? I've seen a few videos of it on you tube, but I'm sure I read somewhere that the angle of the cutter head needs to be somehow changed on a Vinylium in order to use a diamond stylus? Did I...

Thanks so much for that Flozki. I wasn't expecting such a fast answer, especially from the man himself :) I had a look at the pulleys and you were correct that the rubber was rubbing against the case. I pulled it out to 1mm like you said, so hopefully it will have cured it... I'll post again after s...

Hi everyone, new here as a member, but as the owner of a Vinylium Dubcutter I have been reading the forum for some time. I bought the machine with no cutting experience whatsoever, merely an interest in this fascinating hobby, and from the beginning struggled like hell to get a decent cut.... Howeve...