The Secret Society of Lathe Trolls

https://www.youtube.com/watch?v=ji7obr5ANvs&t=16s
1inch record

https://www.youtube.com/watch?v=sdE3IMXkEX4
and half inch record

I've cut thousands of these and other sizes for old robots ,bugs bunny etc .I can cut smaller like so it goes eternal at the end

"REST IN LOVE BROTHER"

I feel so guilty arguing with him back and forth so many times but in the end I loved him even more

Biglove from us always .....Christos Anesti.....

put VR head on this machine..
Iam not there to help..
send machine to someone that can help near where you live to mount head on vortex machine..not me Australia too far ..

if not then sell put in classified

go back to vinyl recorder its better machine

an elementary text book of physics by R.Wallace Stewart( my hard copy) ,but the link says its was written by John Henry Poynting? The authors published 4 books in 1900 general physics. sound. (Iam reading it now amazing) light. heat. all books are on this link https://archive.org/details/atextbookph...

ok I get it ...
try putting the VR head on it
does the overhead cradle move? left to right
can you stop plater when it moves with your hand or is it strong/powerful?
why you get this machine and not use VR

no..you can cheat by taping the record down on the edges of the plater when you cut but in the end the record will still be warped..from memory I setup another light and that helped got it up to 55c.and did the 10 4 with my hands/fingers to hold it down for 5mins pushing down slightly while turntabl...

they have been sitting in a hot truck, airport tarmac floor etc or both

so if all the pictures above came to a customer from johnothon??
then ill say it again ..it looks like it will work to me...

there probably more interested in pressing time code plates and not music

article from 1974

https://www.wildlife-sound.org/resources/articles/44-resources/articles/181-ludwig-koch-master-of-nature-s-music

looks like it will work to me

good luck ,one sold here for 20.000 aud thats 15.000 euro ..

great work fonogabor keep it up
and Sharapov great lathe too you should open up your own thread on here

...good job....take him to task..

and a warning to everyone
don't buy anything unless you see the head cutting and the playback needle PLAYING IT BACK at the same time...

I know it does your head in 8/9 hours days cutting then you start hearing voices,when you cut that drone white noise music ..

there are no hours in love making..I understand if you have mouths to feed or want to become an industrialist but building your own lathe, head ,curve, software etc is probably the best thing you would every do in your life.. it took me years to go hey it works and works well and I made it myself an...

awesome dmills
...........................

and the wax cutting tip back then was stealite or glass

I believe you
,but to much of a coincidence/timing .Cros sends the papers to a Paris science fair in 1876 then it is made by Edison in 1877