The Secret Society of Lathe Trolls

Do not worry, I'm still here! Only had a lot to do! Good news, our head works perfectly !!! :lol: NEO 25s Sinus Line , are not the originals Souris, but absolute genius in the implementation! I also have changed a few little things on the head! Nylon holder by Brass holder exchanged! Power even bet...

hey Bear,..

that great work u made!!!!! TOP!

best regards

Scotty

Not bad Tragwag, that's impressive!

thx..
Scotty

David34 wrote:Wow.. That's fantastic Thanks Snug Music!

No problem David, always happy!

best regards

Scotty

Hey .. That's all depending on the current volume and the bass level! Depending bassy you record, the more wide you need and the deeper you have to cut. That takes a lot of space. the vari-Groove / and deep, it regulates automatically. here is a list for you ... greeting Scotty disc-cutting-timing-c...

mischmerz wrote:.. and here's the link to a short audio (type flac).

https://drive.google.com/open?id=0B82m3JXf-N_7bVNDTDhPRXYyQnc

very great!!!

good sound!

is that a monocut?

michaela,..have u a pink-noise-curve, when u have rocord done?
best regards

Scotty

hey Sensei... True, this is not restricted treat! but I know at the moment not know what to say about that and that makes me a little sad. Sakuszi, I'm really a philanthropist and accept a lot of criticism, but only where it is attached. I told you just made a proposal that it surely would be bette...

dear sakuszi Hello Sakuszi, ... it's great and nice that you post your successes from your machine in this post "who can help ... (T560)" (I think that's great!) ... but please, you could give me and also do the other a big fall? it is here primarily to the VR cutting head and the tweeter or that i...

Ohh,..man,... :roll: ok .. I have much need to change to the driver in order to achieve the quality Which I have now. have worked accurately set and cleanly, quite to my model (Todd / DGM). Working clean, accurate work and a dual focus on that, what I did. Now I have almost reached the quality of BU...

Yes! I am quite Markrob opinion. There's a lot of compromises that you have to make! My best ever I have experienced with the sinus Live Neo 25s! Rated power: 120 W, Pulse: 180 W Impedance: 4 Ohm range: 2-22 kHz (this frequency range has nothing to say!) (indication by the manufacturer) I have with ...

OK guys - just a few more questions: As the preferred tweeters are not so easy to get here in the US, I am starting to look for alternatives. What are the preferred frequency ranges for the tweeters? Most of them will not go below about 2Khz. Is that ok? Did somebody try to build a cutter head from...

that's all ? enough ? excellently ! Thanks , Snug Music ! :mrgreen: :) 8) well, .. I have a little bit more than what I have written to you. I am a former television mechanic and have of course a lot of measuring instruments. (Wobbler, osziloscpe 40Mhz 2 ray, 4 digi multimeter, frequency counter, e...

yeah, I know, but I need to sample the signal in digital form, for example. mp3, test, I do not have the right software, just the audacity, to measure the needed measure of correlation phases, right? I hear that sound is tragic https://www.youtube.com/watch?v=M1t4h-_itlI&feature=youtu.be :mrgreen: ...

is not well, I know [only music is cool] I can not understand the process of bringing a stereo signal to the cutting head. Snug Music. Do you have a digital sound that you drive to your head? MP3? I will try to record the sound my head. I can not understand these phases of the signal.I can not unde...

SUPER MUSIC record 4" 0dB https://www.youtube.com/watch?v=6R91cm9-WqI&feature=youtu.be Hey Sarkuszy, .. good result! What I noticed, you have a few distortions and a channel difference (right more than left!) phase differences? Did you already times by measured by an FFT / RTA Audio Analyzer? Oscil...

Bryan, in my tests with torque tube, I noticed that the tube width directly affects the amplitude of the high frequencies. Using an aluminum tube with 4mm diameter = 14kHz max. Using a torque tube brass with 2mm diameter = 20 kHz easy. Ciuens. hey cius, how come? If the material is dependent? :roll...

And here is a graphic from the B. B. Bauer patent that shows the stylus and head angle combination well: head angle shim.jpg hey my friend Bryan, is that correct? The stylus is located, according to B. Bauer in the 90 degree position and the cutting head is inclined 20 degrees to the rear? Did I un...

sakuszi wrote:wide road !

YES!!!

Wrooommmm..hehee..

so, sometimes short break for me .... I enjoy now only once the morning sun! I believe that I deserve ... sunny greetings to all trolls

best regards

Scotty