Search found 77 matches
- Fri Mar 13, 2015 6:32 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Amp question for Presto cutterhead 1B
- Replies: 10
- Views: 1291
Re: Amp question for Presto cutterhead 1B
The ratings for watts and ohms for 70v + 100v outputs are as follows... 490 ohm @ 70v = 10 watts 500 ohm @ 100v = 20 watts I dont have a chart for 25v lines so unfortunatly I cant help you there... If you are interested in getting your 1B rewound - Send me a P.M and we can discuss your requirements...
- Fri Mar 13, 2015 2:45 am
- Forum: Secrets of the Lathe Trolls
- Topic: Stylus screw damping rubber for Presto 1C & 1D heads
- Replies: 3
- Views: 891
Stylus screw damping rubber for Presto 1C & 1D heads
Hi Trolls,
Now included in my range are stylus screw damping rubbers for Presto 1C & 1 D heads
Nearly every head I come across seems to be missing this part...
$2 AUD each
Sold unpierced - unless the customer requests for me to pierce theirs for them
Now included in my range are stylus screw damping rubbers for Presto 1C & 1 D heads
Nearly every head I come across seems to be missing this part...
$2 AUD each
Sold unpierced - unless the customer requests for me to pierce theirs for them
- Thu Mar 12, 2015 9:45 pm
- Forum: Classifieds & tip-offs
- Topic: Radio station lathe gear from the 40s and 50s
- Replies: 17
- Views: 4783
Re: Radio station lathe gear from the 40s and 50s
Its a 1B that predates being assigned the model number
These heads were also able to be converted to 1-C by the addition of a badge and a little tweaking...
These heads were also able to be converted to 1-C by the addition of a badge and a little tweaking...
- Thu Mar 12, 2015 6:29 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Presto Model Y Lathe
- Replies: 9
- Views: 2324
Re: Presto Model Y Lathe
So far the rebuild has been going smoothly... I've replaced the power cord and wiring throughout Ive also replaced the toggle switches and even added a power light bezel Funds are allocated to cutterhead supplies at the moment so the new flatbelt for the platter has to wait... Ive also been thinking...
- Tue Mar 03, 2015 4:46 am
- Forum: Classifieds & tip-offs
- Topic: Sale stylus ruby, sapphire $ 15
- Replies: 46
- Views: 10472
Re: Sale stylus ruby, sapphire $ 15
I bought 10 of the 1.68 diameter shanks before the price went up (5 ruby & 5 saphire) They fit the presto 5C & Just fit the 1C & 1D At $15 a piece they are great for mucking around and for newbies learning the ropes If you want high grade results you'll have to pay the price and get a ruby or diamon...
- Sat Feb 28, 2015 8:51 pm
- Forum: Playback!
- Topic: Using a Stanton ST 150
- Replies: 6
- Views: 13814
Re: Using a Stanton ST 150
Of the super OEM turntables available - The Stanton St & Str8 150 win hands down
Have you looked into isolating platters and feet?
http://pages.ebay.com/link/?nav=item.view&id=191188693720&alt=web
Have you looked into isolating platters and feet?
http://pages.ebay.com/link/?nav=item.view&id=191188693720&alt=web
- Sat Feb 28, 2015 7:30 pm
- Forum: Playback!
- Topic: Ortofon D 25 M
- Replies: 1
- Views: 6574
Re: Ortofon D 25 M
Ive decided not to go with the ortofon, instead ive opted for a sure m78s
Designed for playing 78 and can be configured for mono too... (win win)
Designed for playing 78 and can be configured for mono too... (win win)
- Sat Feb 28, 2015 5:08 pm
- Forum: Classifieds & tip-offs
- Topic: Ebay: Lots of mono heads
- Replies: 5
- Views: 800
Re: Ebay: Lots of mono heads
I just picked up the Red Tagged 1-D for my collection I negotiated with the seller and got it for less than what he was originally asking, he's now also lowered the price of the standard green 1-D to a more realistic figure too... Guys, dont be affraid to put in an offer on some of these heads... Be...
- Sat Feb 28, 2015 4:14 am
- Forum: Playback!
- Topic: Audax N-20 Cartridge
- Replies: 18
- Views: 11631
Re: Audax N-20 Cartridge
Thanks again Gold + Markrob The subject got a little derailed, but the information you have both provided has been a great help... I've had a bit of a browse over a few different brands of MC & MM carts to familiarise myself a little more with the different types... Just by viewing a few different s...
- Fri Feb 27, 2015 8:10 am
- Forum: Playback!
- Topic: Audax N-20 Cartridge
- Replies: 18
- Views: 11631
Re: Audax N-20 Cartridge
Thanks Gold, Can rule out piezo at 500k because its marked for only 500 ohm and tested 319 Looking at the impedance ratings on some phono stages for both moving coil and moving magnet has leaned me towards believing that might be a moving coil cart EG: Project phono box S - Dual mono configuration p...
- Thu Feb 26, 2015 6:37 am
- Forum: Playback!
- Topic: Audax N-20 Cartridge
- Replies: 0
- Views: 6427
Audax N-20 Cartridge
Hey Trolls Does anybody here know if the Audax N-20 cartridge is a piezo, moving coil or moving magnet? I am in the process of rebuilding a Model Y Lathe & I am about to rewire the tonearm + cart (Audax N 20) Its marked for 500 ohm and an AC Test on it gave a reading of 319 ohms with a strong 1 k to...
- Thu Feb 26, 2015 6:22 am
- Forum: Playback!
- Topic: Audax N-20 Cartridge
- Replies: 18
- Views: 11631
Audax N-20 Cartridge
Hey Trolls Does anybody here know if the Audax N-20 cartridge is a piezo, moving coil or moving magnet? I am in the process of rebuilding a Model Y Lathe & I am about to rewire the tonearm + cart (Audax N 20) Its marked for 500 ohm and an AC Test on it gave a reading of 319 ohms with a strong 1 k to...
- Wed Feb 25, 2015 5:11 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Presto Model Y Lathe
- Replies: 9
- Views: 2324
Re: Presto Model Y Lathe
Thanks Aussie, I've temporarily replaced the cap with a cheapy from my local electronics shop and got it running again Ive ordered N.O.S Replacements - Should be here in about 2 weeks... Ive conducted a thorough inspection of the lathe and found 2 small flat spots + 1 chip on the platters rim rubber...
- Mon Feb 23, 2015 12:19 am
- Forum: Secrets of the Lathe Trolls
- Topic: Presto Model Y Lathe
- Replies: 9
- Views: 2324
Presto Model Y Lathe
Hi Trolls, 2 days ago I was fortunate enough to aquire a very rare find... A Presto Model Y record lathe with Australian 240v power source originating from one of australias leading am radio stations Ive begun rebuilding it & discovered that the power switch and the mic switch were bypassed by the p...
- Tue Feb 10, 2015 7:14 pm
- Forum: Playback!
- Topic: Ortofon D 25 M
- Replies: 1
- Views: 6574
Ortofon D 25 M
Hi Trolls Just wondering if anyone here has had any experience with the ortofon d 25 m Ive been looking at replacing my current audio technica cart and stylus with something more suited to playing the mono records that ive cut on my presto lathe The docs say that it is a micro groove stylus, but it ...
- Wed Feb 04, 2015 9:26 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Cutterhead repair / rebuild service
- Replies: 25
- Views: 4809
Re: Cutterhead repair / rebuild service
Ok, but why 2 coils for 1C or 1D ? It's a mono head, no stereo ... Stronger + more accurate response from the stylus having coils on north & south ends The 1C & 1D have 2 coils vertically parallel to each other - Wired in series & inverted... The 2 coils are driven on a single channel. Stereo heads...
- Wed Feb 04, 2015 3:40 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Cutterhead repair / rebuild service
- Replies: 25
- Views: 4809
Re: Cutterhead repair / rebuild service
Hi studiorp, The coils pictured outside of the heads are brand new voice coils that are ready to be installed into another head... (They are the same as the coils that are installed in the heads) 2 coils for presto 1C / 1D heads 1 coil for 5C heads "I have coils in stock that can be purchased for th...
- Wed Feb 04, 2015 8:51 am
- Forum: Secrets of the Lathe Trolls
- Topic: Presto 1D on You Tube
- Replies: 1
- Views: 407
Presto 1D on You Tube
Hi Trolls
Ive set up a you tube channel and have uploaded my first video of a Presto 1D after rewinding it from 500 to 8 ohm
Check it out...
Presto 1D Rewound: http://youtu.be/0fLc9TzQxzo
Ive set up a you tube channel and have uploaded my first video of a Presto 1D after rewinding it from 500 to 8 ohm
Check it out...
Presto 1D Rewound: http://youtu.be/0fLc9TzQxzo
- Wed Feb 04, 2015 5:47 am
- Forum: Secrets of the Lathe Trolls
- Topic: Cutterhead repair / rebuild service
- Replies: 25
- Views: 4809
Re: Cutterhead repair / rebuild service
Hi Trolls, Ive decided to expand operations and offer parts to purchase... Currently I have in stock... Voice coils for Presto 1C / 1D & 5C (8 & 15 ohm wound on my custom made teflon spools) Brass damping fixtures for Presto 1C / 1D Damping blocks for Presto 1C / 1D & 5C Cutterhead leads (22 Gauge S...
- Wed Jan 21, 2015 3:27 am
- Forum: Secrets of the Lathe Trolls
- Topic: Cutterhead repair / rebuild service
- Replies: 25
- Views: 4809
Re: Cutterhead repair / rebuild service
1C/1D & 5C Teflon bobbins