The Secret Society of Lathe Trolls

Dear opcode I know that you are a great expert in the field of cutting, I always listen to your advice. I repeatedly heard from you and other professionals that Sapphire does not cut polycarbonate. About a year ago I did a little test, I standard sapphire NS-2S cut Pressed PVC disc, After listening,...

Yes, you are absolutely right! 100 fold increase produced no results, but there are the 200 and 400-fold, how to make photo immediately upload. I have a very large number of styluses so I have to sell them, but this requires them to examine carefully. And the last question, polishing the (Facet) is ...

dubcutter89 wrote: Do they have facettes?

Lucas I understood your question, today look in a microscope and exactly say present a facettes or no.

I do not have the opportunity to experience these stones but soon I can test their.

All stones sharpened with high precision, but deepened into the holder all in different ways, so the height of the stone is different. Sharpening Rubies and Sapphires are different from each other, photos under the microscope can I do. I can not understand one of your questions: Do they have facette...

Hi dear trolls! I have for you a very interesting proposal. Earlier I wrote that I own a small collection of stylus, now I'm going to sell them. At the moment there are three different versions, Ruby - aluminum holder, sapphire - Aluminum holder, sapphire - a steel holder. All have the same size, st...

Hi bumbinstien! I had such a problem, I am have long suffered very and messed least 20-30 lacquer discs. In a result I performed a miracle and now each record for me a pleasure!
I hope my experience will help you!

Hi Piaptk!
I was at the jeweler, he said that it is not a diamond, it is a synthetic sapphire. I am pleased and sapphires Cut by them I have not tried, but is they are made a qualitatively there is no doubt! They were made in the Soviet Union, it indicates the high quality.

Probably I Will be ready to sell a few pieces, but a bit later. Before we take money from people, I am obliged to to give some guarantee, for example 10, 20, or 50 hours. If I'm going sale i will write it in our forum.

I totally agree with you, most likely it not valuable stone. I really want elucidate the potentialities these stylus. during recording not unwrapped stylus 180 degrees, it is installed flat side of. Stylus is not pressed the reverse side, namely cut record, I have the remnants of of thin filaments, ...

Thank opcode66! I will try to rewind a simple wire, if the result would bad, then I will try other options. If I'm not mistaken sapphire cuts only lacquer. This stylus is cut plastic the blank, the former owner of the cutting head gave me the blanks for cutting. I'm not saying that it was a diamond,...

Hi Lucas!! I would be very grateful if you can measure the resistance of the cutting head and to write me. In an extreme case I will try to add of turns and bring to 4 ohms. With the suspension I understood, but the depth control system I can not to do :( . Stylus I wanted to sell, but I will not. I...

Hi trolls!!! Need your help. I have a cutter head (mono). This head was made in Russia, most likely it has no name and model number. The cutting head is not working, the coil burnt. I decided to reel new coil. Coil resistance could not measure, since all the turns were shorted. I counted the number ...

Hi Dear Chris! Do not scold me, I not bought this press because , i not possess the knowledge that you possess. If I knew all the details of fabrication, I would definitely bring this machine to a working condition. Here in Russia are no unrealizable of actions, All can be done and remould, and add ...

In China, you can buy a new. Year ago I wanted buy there such a press.

Hi!! I am with you for 3 years already!

Hi Aussie0zborn, thank you! A month later, I will make an order to the master disks and immediately buy Scribing Platform.

Thank opcode66, I will seek!

Hi Chris. I can make it myself, but I want the original! What is the name of this tool?