diskomat v2.0
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
diskomat v2.0
hello.
just did the first cut on my new disk-o-mat.
version 2. this time i built all from scratch. turntable, carriage all.
for first tests i use my "testpilot" grampian with a passive riaa encoder.
the passiv riaa i will present in the schematics section later.
so here some pictures from the mechanics. its much more compact.
and not so heayvy. the heaviest part is the turntable.approx 13 kg and 7 inch diameter. the turntable has vacuum suction from bottom.
also the mechanics consist of from the shelf parts and a few custom built parts. but nothing very complicate. so orders can pe placed.haha.
at the moment a lot is still beat and very bricolage...but it seems to work and much better than the last time.
more soon.
and a closer look to the turntable.
have a nice weekend
flo
just did the first cut on my new disk-o-mat.
version 2. this time i built all from scratch. turntable, carriage all.
for first tests i use my "testpilot" grampian with a passive riaa encoder.
the passiv riaa i will present in the schematics section later.
so here some pictures from the mechanics. its much more compact.
and not so heayvy. the heaviest part is the turntable.approx 13 kg and 7 inch diameter. the turntable has vacuum suction from bottom.
also the mechanics consist of from the shelf parts and a few custom built parts. but nothing very complicate. so orders can pe placed.haha.
at the moment a lot is still beat and very bricolage...but it seems to work and much better than the last time.
more soon.
and a closer look to the turntable.
have a nice weekend
flo
- alienmanstk
- Posts: 36
- Joined: Tue Aug 19, 2008 12:04 pm
at the moment the record lenght is 1.5 minutes. which is for most people too long. so i will put to 1 minute or better i will add a end button so you can stop after the time you want and extend to 2.5 minutes....
speed is 45.
at the moment we show it in bern at an exhibition. until sunday
http://www.grossehalle.ch/reitschule/grossehalle/akt.html
but still some small problems. but becomes better and better.
f.
speed is 45.
at the moment we show it in bern at an exhibition. until sunday
http://www.grossehalle.ch/reitschule/grossehalle/akt.html
but still some small problems. but becomes better and better.
f.
yes i knew the mutoscope pictures.... hehe.
but no chance to sse it one in real.
there is a video documentation but then the 2nd version was almost finished..not in the case yet.. in german. but you can see how the mechanics
work
check out:
http://www.digitalbrainstorming.ch/multimedia/video/FloKa_DE_H264
and i work on version 3.
still a few things to tune. but the basic concept works well now...
but no chance to sse it one in real.
there is a video documentation but then the 2nd version was almost finished..not in the case yet.. in german. but you can see how the mechanics
work
check out:
http://www.digitalbrainstorming.ch/multimedia/video/FloKa_DE_H264
and i work on version 3.
still a few things to tune. but the basic concept works well now...
aaa yes.
here some more pictures when the beast was in action at an openair music festival... there was always a long cue in front of the machine...
and yes if you want one. i am happy to bould you one.hehe....but its is not a low cost budget project anymore....if you want to have it more or less reliable....
http://www.floka.com/diskomat/bad_bonn_cutting09.html
and the general page...
http://www.floka.com/diskomat.html
sorry havent updated recently...
last august the disk-o-mat was in norway. i can transport the whole mechanics in a big suitcase and the booth is made by local people...
here you find some pictures on flickr.....
http://www.flickr.com/photos/makarellos/3869313465/in/set-72157601327320336/
http://www.flickr.com/photos/makarellos/3869313319/in/set-72157601327320336/
here some more pictures when the beast was in action at an openair music festival... there was always a long cue in front of the machine...
and yes if you want one. i am happy to bould you one.hehe....but its is not a low cost budget project anymore....if you want to have it more or less reliable....
http://www.floka.com/diskomat/bad_bonn_cutting09.html
and the general page...
http://www.floka.com/diskomat.html
sorry havent updated recently...
last august the disk-o-mat was in norway. i can transport the whole mechanics in a big suitcase and the booth is made by local people...
here you find some pictures on flickr.....
http://www.flickr.com/photos/makarellos/3869313465/in/set-72157601327320336/
http://www.flickr.com/photos/makarellos/3869313319/in/set-72157601327320336/