7" laquers
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
7" laquers
anyone know of another source of 7" laquers other than apollo? i'm very close to getting my first lathe worthy of actually making a decent cut and i'm looking to purchase some blanks soon. i'll definately be using apollo for 10s and 12s but their 7s seem pretty pricey.
any help is appreciated!
any help is appreciated!
all the best!
- tommie 'plan 9' emmi
poly-cut lathe cuts / cymbalism recordings
- tommie 'plan 9' emmi
poly-cut lathe cuts / cymbalism recordings
- Aussie0zborn
- Posts: 1828
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: 7" laquers
Hey You did a good job in regards to the presto but this guy has also a whole heap of 7" blanks starting at $300 that is for less than $3 eachcymbalism wrote:anyone know of another source of 7" laquers other than apollo? i'm very close to getting my first lathe worthy of actually making a decent cut and i'm looking to purchase some blanks soon. i'll definately be using apollo for 10s and 12s but their 7s seem pretty pricey.
any help is appreciated!
Here is his listing FYI
http://cgi.ebay.com/Transco-7-Master-Recording-Blanks-NOS-124-discs_W0QQitemZ120429914548QQcmdZViewItemQQptZVintage_Electronics_R2?hash=item1c0a2ea9b4&_trksid=p3911.c0.m14&_trkparms=65%3A12
They have the big hole but that should not be an issue Their are NOS but I am sure you would want a few cheapies to sharpen your skills on initially
Good Luck
Cheers
Re: 7" laquers
yeah, he told me he had them when i was gonna buy the lathe off of him but when i came across a better deal i offered to buy them directly from him and he said he wasnt gonna sell them separately, but now he is so we'll see!mossboss wrote:Hey You did a good job in regards to the presto but this guy has also a whole heap of 7" blanks starting at $300 that is for less than $3 each
Here is his listing FYI
http://cgi.ebay.com/Transco-7-Master-Recording-Blanks-NOS-124-discs_W0QQitemZ120429914548QQcmdZViewItemQQptZVintage_Electronics_R2?hash=item1c0a2ea9b4&_trksid=p3911.c0.m14&_trkparms=65%3A12
They have the big hole but that should not be an issue Their are NOS but I am sure you would want a few cheapies to sharpen your skills on initially
Good Luck
Cheers
all the best!
- tommie 'plan 9' emmi
poly-cut lathe cuts / cymbalism recordings
- tommie 'plan 9' emmi
poly-cut lathe cuts / cymbalism recordings